the aim of this article is study of tool plunge depth (tpd) effects on mechanical properties of friction stir welding of aa1100 aluminium alloy to a441 aisi steel. for this purpose the 0.1, 0.2, 0.4, and 0.6 mm tpd selected and other welding parameters kept constant. the results shows that the frictional heat increases and stir zone grain size decreases with increasing tpd at both base metals. ...

Nowadays, strong, light-weight, multi-functional, high performing products are key for achieving success in the worldwide markets. Meeting those requirements calls for enabling technologies that lead to innovative and sustainable manufacturing [1]. A joint technique is one or a combination of the available mechanical, chemical, thermal processes to create a bond between materials with a number ...

The performance of laser welding of Ti and two dental precious alloys (Ag-Pd-Au, Au-Pt-Ag) was investigated by mechanical testing and microscopic observation, using butt joint as design. The laser irradiation was done using a commercial Nd:YAG dental laser-welding device in a single pulse mode with output currents 150, 200, 250, 300A, spot diameters 0.6, 0.9, 1.2mm, and pulse duration 10ms. The...

Since welding residual stress is a major factor in the generation of Primary Water Stress Corrosion Cracking (PWSCC), it is essential to examine the welding residual stress to prevent PWSCC. In order to predict this residual stress, several artificial intelligence methods have been developed and used as a powerful tool in nuclear engineering fields. In this study, two data-based models, support...

dissimilar metals friction welding of austenitic–martensitic stainless steels is commonly used in order to manufacture engine valves in the automobile industry. in this study, x53crmnnin219 (austenitic stainless steel) and x45crsi93 (martensitic stainless steel) valve steel rods were welded by friction welding process. the welded joint was then heat treated at 760 0c for 60 min. mechanical prop...

Friction stir welding does not involve bulk melting of the components that are joined. This has inspired attempts to exploit it for joining materials which differ in properties, chemical composition or structure, and where fusion can lead to detrimental reactions. The purpose of this special issue of Science and Technology of Welding and Joining was to assess the status of friction stir welding...

the microstructure of hp stainless steel in aged and aged + solution annealed conditions and solutionized alloy 800 was characterized by optical microscopy, scanning electron microscopy (sem), and transmission electron microscopy (tem) equipped by eds. all phases present in the above condition were described. the effects of solution annealing heat treatment temperature on the microstructure, te...

Tungsten Inert Gas welding (TIG) process is an important component in many industrial operations. The TIG welding parameters are the most important factors affecting the quality, productivity and cost of welding. This paper presents the influence of welding parameters like welding current, welding speed on strength of low carbon steel on AA1050 material during welding. A plan of experiments bas...

–Friction stir welding is a solid state welding technology used for welding low melting point metals, such as Al, Mg and its alloys. Later welding was conducted on dissimilar metals which also produced a better defect free joint. Tool design and welding parameters contributes a major role for producing a better weld. Material flow and friction heat are the factors that the internal factor for t...

the current work was carried out to characterize welding of aisi 310 austenitic stainless steel to inconel 657 nickel-chromium superalloy. the welds were produced using four types of filler materials; the nickel-based corresponding to inconel 82, inconel a, inconel 617 and austenitic stainless steels 310. of the two joints involved, this paper describes the choice of welding consumables for the...