The present study demonstrates how the Genetic Algorithm (GA), coupled with the CFD solvers ARC2D for 2D and KTRAN for 3D problems, can successfully be applied to the airfoil and wing aerodynamic drag minimization. The geometry of airfoil and wing sections is represented by a B-spline curve. The actual values of the coordinates of the control nodes for the B-spline curve are designated as the d...

The distribution of dynamic pressure behind a Harris' hawk's wing was sampled using a wake rake consisting of 15 pitot tubes and one static tube. The hawk was holding on to a perch, but at an air speed and gliding angle at which it was capable of gliding. The perch was instrumented, so that the lift developed by the wing was known and the lift coefficient could be calculated. The mean of 92 est...

This paper mainly researched on influence of vortex generator on lift coefficient and drag coefficient, when vortex generator is mounted on a flat plate. Vented cylinders were used as vortex generators which intensify vortex shedding in the wake of the vented cylinder as compared to base line circular cylinder which ensures more attached flow and increases lift force of the system. Firstly vent...

In the current era of globalization every prosperous nation in this world wishes to develop a fast moving aircraft with a high lift coefficient and low drag coefficient, which helps them to enhance their military force and strengthens its civilization’s foundation. The purpose of this study is to examine the viscous, incompressible and steady-state flow over the F-16 aircraft using computer mod...

In this paper the effects of rigid triangular passive vortex generators on a  hydrofoil were investigated numerically.  In the first step using the Finite Volume Method the bare hydrofoil  were modeled and the results of lift and drag coefficients were validated using experimental data. In the next step the hydrofoil armed with vortex generators was modeled and its effect on the hydrofoil perfo...

determining characteristics and behavior of fluid flow and obtaining the aerodynamic coefficients are important and considerable tasks in investigation of flow over the bodies. in this research, leading edge radius effects on the flow behavior over a delta wing with a sweep angle of 50 degree at different reynolds numbers between 0.5×106 and 2.5×106 are investigated numerically. three different...

Conceptual wing design analysis methods are combined with numerical optimization to find minimum drag wings subject to constraints on lift, weight, pitching moment, and stall speed. Minimum drag tip extensions and winglets are compared using nonlinear optimization. The minimum drag trapezoidal tip device depends on the ratio of the maneuver lift coefficient to the cruise lift coefficient, altho...

in this paper, the effect of electric field on two-dimensional low reynolds air flow around an airfoil and variation of the forces acting on the airfoil is numerically investigated. the electric current and poisson’s equations are solved and the outcome is considered as a source term in the momentum equations. the energy equation is not considered due to its weak effect on the phenomena. the fi...

The main aim of this study was to investigate the effect of finger spread on the propulsive force production in swimming using computational fluid dynamics. Computer tomography scans of an Olympic swimmer hand were conducted. This procedure involved three models of the hand with differing finger spreads: fingers closed together (no spread), fingers with a small (0.32 cm) spread, and fingers wit...