OBJECTIVES The objective was to quantify the blue-light hazard from CO(2) arc welding of mild steel. METHODS The spectral radiance of arcs in CO(2) arc welding of mild steel was measured for solid and flux-cored wires at welding currents of 120-480 A. Effective blue-light radiance and the maximum acceptable exposure duration were calculated from the spectral radiance using their definitions i...

D. Dobrota, Engineering Faculty, University “Constantin Brâncuşi” of Târgu-Jiu, Romania, Gh. Amza, Engineering and Tehnological Systems Management Faculty, Polytehnic University of Bucharest, Romania, Research presented in the paper refers to the structural analysis of materials that are thermally infl uenced for loading by welding of pieces in the classical variant of manual coated electric ar...

Abstract. The Shielded Metal Arc Welding (SMAW) is a typical manual process with many dangerous application for the welder (pipe hot tapping, underwater welding, etc.). The process robotization seems to be great for safety associated with the improvement of weld quality and repeatability. This work presents a methodology developed for real time trajectory generation for the robotic SMAW. In thi...

This is the report of a welder who performed argon-shielded electric arc welding in an atmosphere containing trichloroethylene. He developed immediate respiratory symptoms, pulmonary edema 12 hours after exposure, and recurring dyspnea ten days after exposure. These pulmonary reactions might be explained by inhalation of decomposition products of trichloroethylene such as dichloroacetyl chlorid...

this paper presents a new arc starter circuit that is usable in manual metal arc welding (mma) power supplies. the proposed circuit uses an auxiliary circuit and a series coupling transformer for adding high frequency spikes to output dc voltage during arc striking. the proposed circuit is usable in inverter based arc welding supplies and it could result in a decrease of weigh, volume and expen...

Bring forward a new analytical method in order to evaluate the stability of the process of aluminum alloy pulsed MIG welding. The ratio of the first and the second peak in arc voltage signal probability density was selected to evaluate aluminum alloy pulse MIG welding stability. By calculating the arc voltage signal probability density from 80 sets of welding experiments, the ratio of the two p...

Gas tungsten arc welding (GTAW) or Tungsten inert gas welding (TIG) is one of the widely used techniques for joining ferrous and non-ferrous metal.Gas tungsten arc welding process,consist of non-consumable tungsten electrode which is used to provide the arc for welding. During the welding cycle a shield of inert gas expels the air from the welding area and prevents oxidation of the electrode, w...

Submerged arc welding is preferred over other methods of welding because of its inherent qualities like easy control of process variables, high quality, deep penetration, smooth finish, capability to weld thicker sections. Since the development of submerged arc welding process, welding engineers are striving for reduction in welding cost without compromise in the performance of the weld. Flux u...

Submerged arc welding also known as sub arc welding has become a chief welding process because of its ability to deposit large amounts of metal with high penetration. The quality of weld depends on bead geometry of the weld which in turn depends on the process variables. This paper deals with the application of factorial design approach for optimising four submerged arc welding parameters viz. ...