Corrosion inhibition of mild steel in 1 M HCl and 0.5 M H2SO4 by dapsone were studied by polarization resistance, Tafel polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurement. Results obtained revealed that inhibition occurs through adsorption of the drug on metal surface without modifying the mechanism of corrosion process. Potentiodynamic polarization suggested...

A new electrochemical model has been carefully established to explain the carbonation behavior of cement mortar, and the model has been validated by the experimental results. In fact, it is shown by this study that the electrochemical impedance behavior of mortars varies in the process of carbonation. With the cement/sand ratio reduced, the carbonation rate reveals more remarkable. The carbonat...

Electrochemical impedance spectroscopy (EIS) is recognized to be a powerful and noninvasive technique to test the integrity of protective coatings on memorials, but commercial EIS systems are rather costly though versatile devices. This paper describes a low cost and portable EIS system that is based on a compact digital signal processor (DSP) board and embeds the potentiostatic function so tha...

Electrochemical systems with high capacities demand devices for electrochemical impedance spectroscopy (EIS) with ultra-low frequencies (in order of mHz), that are almost impossible to accomplish with analogue techniques, but this becomes possible by using a computer technique and accompanying digital equipment. Recently, an original software and hardware for electrochemical measurements, inten...

in this investigation, attempts were directed to study the inhibitive effects of nitrite and phosphate base inhibitors for the carbon steel alloy samples, which are used in an acid gas treatment process (the sulfiran® solution), in fe-edta solution. electrochemical techniques, i.e. polarization curves and electrochemical impedance spectroscopy (eis), were used to evaluate the inhibition efficie...

We designed a novel 6-point electrochemical impedance spectroscopy (EIS) sensor with 15 combinations of permutations for the 3-D mapping and detection of metabolically active atherosclerotic lesions. Two rows of 3 stretchable electrodes circumferentially separated by 120° were mounted on an inflatable balloon for intravascular deployment and endoluminal interrogation. The configuration and 15 p...

The protection influence of three sulfa guanidine azo derivatives against nickel corrosion was studied in 0.5 M HCl solutions at 25oC. Measurements were conducted under various experimental conditions using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. These studies have shown that sulfa guanidine azo deriva...

An attempt has been made to investigate the effect of SiO2 nanoparticles on the conductivity of polypyrrole conducting polymeric films prepared by an electrochemical method. The obtained nanocomposites were characterized by FTIR, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The results indicate that the conductivity of the nanoco...

Polarization, solution-separator, charge transfer, and diffusion resistances of clean and used separator electrode assemblies were examined in microbial fuel cells using current–voltage curves and electrochemical impedance spectroscopy (EIS). Current–voltage curves showed the total resistance was reduced at low cathode potentials. EIS results revealed that at a set cathode potential of 0.3 V di...