Montmorillonite (MMT) clay mineral is widely used as filler for several organic coatings. Its activity is increased by exfoliation via chemical modification to produce nanomaterials. In the present work, the modification of MMT to form nanogel composites is proposed to increase the dispersion of MMT into epoxy matrices used to fill cracks and holes produced by the curing exotherms of epoxy resi...

Liquid epoxy resins have received much attention from both academia and the chemical industry as eco-friendly volatile organic compound (VOC)-free alternatives for applications in coatings and adhesives, especially in those used in households. Epoxy resins show high chemical resistance and high creep resistance. However, due to their brittleness and lack of thermal stability, additional fillers...

The creep and dynamic mechanical behavior of natural fiber/epoxy composites using functionalized multiwalled carbon nanotubes (MWCNTs) modified matrix were investigated. 0.4 wt% of MWCNTs functionalized with carboxylic acid groups (MWCNTs-COOH) were dispersed in epoxy and three-phase multiscale hybrid composites were processed by hot press. Natural fiber/epoxy two-phase composites without MWCNT...

This research aimed to evaluate the thermal properties of new formulations of phase change materials (PCMs)-epoxy composites, containing a thickening agent and a thermally conductive phase. The composite specimens produced consisted of composites fabricated using (a) inorganic PCMs (hydrated salts), epoxy resins and aluminum particulates or (b) organic PCM (paraffin), epoxy resins, and copper p...

Based on the template-induced self-assembly characteristic of cyclomatrix polyphosphazene micro– nanometer materials, novel poly(cyclotriphosphazene-co-bisphenol A)-coated boron nitride (PCB-BN) was designed and synthesized by in situ condensation polymerization on the surfaces of boron nitride (BN) particles using the reaction of hexachlorocyclotriphosphazene (HCCP) with bisphenol A (BPA). It ...

in the present research work, the flexural modulus and strength of glass fiber-epoxy resin and carbon fiber-epoxy resin composites have been enhanced through fiber tension during curing of the polymeric resin. this study showed that the tension applied on the fibers increased the flexural modulus of the glass-epoxy composites up to 12% and the flexural strength up to 19%. the flexural modulus a...

Conductive polymer composites require a three-dimensional 3D network to impart electrical conductivity. A general method that is applicable to most polymers for achieving a desirable graphene 3D network is still a challenge. We have developed a facile technique to fabricate highly electrical conductive composite using vacuum-assisted infusion of epoxy into graphene sponge GS scaffold. Macroscop...

Coupling of fiber posts to composites is hampered by absence of chemical union between epoxy resins and methacrylate-based resins. This study examined a clinically feasible protocol for creating micromechanical retention on the surface of fiber posts, using hydrogen peroxide etching to remove the surface layer of epoxy resin. This was followed by silanization of the exposed quartz fibers to enh...

Owing to its superior mechanical properties, nanodiamond (ND) holds great potential to improve tribological characteristics of composites. In this study, we report on the wear and dry friction of epoxy-ND composites prepared from as-received and aminated ND across the length scale range from macro to nano. Comparison of macroscale, microscale, and nanoscale frictional behavior shows that ND is ...

Functionalization of single-walled carbon nanotubes (SWNTs) with covalently grafted amine moieties provides reactive fillers with potential covalent anchoring to an epoxy matrix. Manufacturing and characterization of a high performance epoxy system reinforced with as-grown and aminated SWNTs are presented through four different approaches. Epoxy composite materials incorporating SWNTs aminated ...