In turbocharged engines with wastegate the exhaust pressure can change rapidly. Two methods to estimate the exhaust manifold pressure are compared for diagnosis of wastegate and turbocharger of a spark-ignited engine. One relies on the first law of thermodynamics and produces changes in exhaust manifold pressure. The second uses a model of the mass of remaining exhaust gases in the cylinder and...

When looking at the effects of diesel engine exhaust on the environment, it is important to first look at the composition of the exhaust gases. Over 99.5% of the exhaust gases are a  combination of  nitrogen, oxygen, carbon dioxide, and water. With the exception of carbon  dioxide, which contributes about  5% of the total volume, the diesel engine exhaust consists of  elements which are part of...

An experimental study is carried out to investigate engine performance parameters and methods of reducing emissions from spark ignition engine. The used engine is four stroke four cylinder naturally aspirated spark ignition engine with compression ratio of 9, bore diameter of 80 mm and stroke of 90 mm. The engine performance parameters are presented with and without exhaust gases recirculation ...

In this paper we analyze the nonlinear dynamic be havior of an internal exhaust gas recirculation system based on the mean value model of an experimental en gine equipped with a camshaft phaser We develop a dynamic camshaft timing schedule that regulates the in ternal exhaust gas recirculation system while maintain ing transient engine torque response similar to an engine with zero exhaust gas ...

An adaptive-passive quarter-wave tube resonator silencer was experimentally tested using recorded in-duct reciprocating engine exhaust noise. The exhaust noise was re-played through a loudspeaker attached to one end of a duct, and the adaptive passive system was able to track changes in engine speed and provide attenuation of the noise at the fundamental firing frequency of the engine and the t...

The paper presents the results of modelling thermal cycle of internal combustion engine including exhaust gas recirculation. The test engine can not achieve the optimum parameters of work due to occurrence of the knock combustion. The influence of EGR on the limits of the knock occurrence in the engine was studied. It turned out that few percent of exhaust gases in the fresh charge effectively ...

in this study, a numerical simulation using the cfd software, fluent, has been conducted to examine the effect of various shapes of the venturi component sections in order to find the optimum venturi specifications to increase the egr rate with minimum pressure loss at the part load operation range. the cfd results reveal that the venturi should be precisely optimized to introduce the required ...

This paper documents the application of exhaust gas fuel reforming of two alternative fuels, biodiesel and bioethanol, in internal combustion engines. The exhaust gas fuel reforming process is a method of on-board production of hydrogen-rich gas by catalytic reaction of fuel and engine exhaust gas. The benefits of exhaust gas fuel reforming have been demonstrated by adding simulated reformed ga...

Dimethyl Ether (DME) has been attracting attention as an alternative fuel for diesel engines because it can be produced from various feed stocks and does not create smoke. On the other hand, a DME truck require a large volume fuel tank in order to obtain the running distance equivalent to diesel trucks due to the lower energy content per unit volume of DME, and un-burned gas and fuel consumptio...

–Fast depletion of fossil fuels demands an urgent need to carryout research to find viable alternative fuels such as Hydrogen, LPG and CNG. The gaseous hydrocarbons seem to be best immediate option presently available[1]. The remarkable feature of gaseous fuels are the absence of mineral impurities, the consistency in quality and the convenience and efficient in use. LPG is used widely as a co-...