Cathode spot motion influences the physical characteristics of arc plasma and the related macroparticles (MPs) in resultant films; these MPs limit the application of arc ion plating (AIP). In this paper, a scanning radial magnetic field (SRMF) was applied to the cathode surface to control the cathode spot motion and reduce the MP contamination in the deposited films. It was shown that film surf...

In electron beam devices, the voltage applied to the cathode (w.r.t. grid voltage) provides the initial energy for the electrons. Based on the type of electron emission, the electron sources are (mainly) classified into thermionic cathodes and cold cathodes. The power consumption of a cold cathode is smaller than that of a thermionic cathode. The delay time of the electron emission from a cold ...

This article reports the development of (a) vertical and (b) lateral diamond vacuum field emission devices with excellent field emission characteristics. These diamond field emission devices, diode and triode, were fabricated using a self-aligning gate formation technique from silicon-on-insulator wafers using conventional siliconmicropatterning and etching techniques. High emission current N0....

– Cluster-assembled carbon films deposited at room temperature from a supersonic cluster beam are found to be good electron field emitters. The films have been characterized by Raman spectroscopy showing a largely sp bonded character. Scanning Electron Microscopy shows that the films have a low-density granular structure, characterized by voids on the nanoscale. We have observed a threshold fie...

Photon-enhanced thermionic emission (PETE)[1] appears as a promising technology for electric power generation from renewable resources. Its combination of photovoltaic and thermionic effects leads to devices which can operate at high temperature through thermionic emission still exploiting efficient electrons promotion through a semiconductor band gap when it is chosen as a cathode. However, th...

We report measurements of the azimuthal emission nonuniformity of a gyrotron's thermionic cathode as determined from two experiments, one which determines the total emission and one which scans the emitted beam using a rotating probe. In the total emission experiment, which measured the total collector current over a range of voltages, the cathode's total work function spread was found to be 0....

By favoring the L-peak emission over the bremsstrahlung part, direct quasi-monochromatic soft x-ray emission has been obtained with a field emission (FE) x-ray source. The electron impact x-ray setup uses an arrayed cathode of carbon nanopearl FE tips as a stable cold electron source within a vacuum of 10(-6)-10(-7) Torr. The high brightness of the FE e-beam coupled with the array structure of ...