an optimal design and fabrication of compressors requires flow investigation through the compressor components. flow field inside the volute is fully three dimensional and turbulent. better understanding of flow mechanism leads to improve the volute design procedure. in this research the experimental and numerical flow investigation through a radial flow compressor volute are performed to recog...

abstractinduced total pressure by flow, including mean and fluctuating components, around a selected chute block in saf stilling basins downstream of an ogee spillway was studied. several pressure holes were selected on various faces of a selected chute block to get enough information regarding the total pressure field. this paper reports the results of an experimental work and measurement of m...

there are several sources for pressure oscillations in solid propellant rocket motors. oscillatory flow field is one of them. free shear layers in motor flow field cause vortex shedding. end edges of propellant grains and baffle edge in two-segmented motors are samples of such zones. these vortices move from their forming points and strike the field walls. the kinetic energy of vortices change ...

The flow behavior around a cam shaped tube in cross flow has been investigated experimentally using flow visualization and pressure distribution measurement. The range of attack angle and Reynolds number based on an equivalent circular diameter are within 0 ≤ α ≤ 360˚ and 2 x 104 < Reeq < 3.4 x 104, respectively. The pressure drag features are clarified in relation to the flow behavior around t...

an experimental study has been performed to investigate the flow physics of an under-expanded axisymmetric supersonic jet exhausting transversely from a flat plate into a subsonic compressible cross flow. the goal was to study the effects of boundary layer thickness ratio (δ/d) and the jet to free stream dynamic pressure ratio (j) on surface pressure. the resulting measurements distinctly show ...

In this paper, the removal of phenol by using aqueous solution in a low pressure reverse osmosis membrane was investigated. The effect of feed pressure, feed concentration, feed flow rate and feed pH on phenol rejection was investigated. The results showed that feed pH is the most affective parameter on the phenol rejection. Rejection of phenol increased with increasing pH from 2 to 10 under th...

designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied together with design and build a low-speed wind tunnel. a specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. there are generally three regi...

The study of two-phase fluid flow behavior in hydraulic structures such as pressurized flow tunnels, culverts, sewer pipes, junctions and other similar conduits is of great importance. A two-phase mixture flowing in a pipe can exhibit several interfacial geometries such as bubbles, slugs or films, depending on the fluid and hydrodynamic properties of flow. The main variables, giving rise to a v...

Two phase gas-liquid flow pattern in a horizontal pipeline is predicted very accurately using a newly-developed analytical relation. The pattern identification is based on one of the most widely used graphs, the Baker diagram, modified in a way that compensates for the unrealistic oversimplifications of recent works. The Kern's method of pressure drop calculation is used to obtain the frict...

In this work, the effects of permeate pressure and feed flow rate on the performance of a composite polyvinyl alcohol (PVA) membrane in the removal of benzene from gasoline by pervaporation (PV) were evaluated. The results indicate the remarkable effect of permeate pressure on membrane performance as reducing permeate pressure (higher vacuum) from 30 to 3 mmHg causes the total flux to increase ...