Fluidized bed agglomeration is an advanced technology to produce spherical coarse-grained material of uniform size ready for sale without any need for post-treatment. This study discusses the possibilities and appropriateness of an intelligent control method such as a fuzzy logic controller in simulating and controlling fluidized bed agglomeration performance. Modeling and simulation was perfor...

Effects of rapid heat transfer using a fluidized bed on the heat-treating response of Al-Si-Mg alloys (both unmodified and Sr modified) were investigated. The heating rate in the fluidized bed is greater than in conventional air convective furnaces. Particle size analyses of eutectic Si showed that the high heating rate during fluidized bed solution heat treatment causes faster fragmentation an...

Introduction Understanding the jetting phenomena near the gas distributor plate in a fluidized bed is important to gassolids mixing, heat and mass transfer, and erosion on any bed internals, which can all affect the performance of the bed. Moreover, acoustic vibration in a fluidized bed can be used to enhance the fluidization quality of particulate matter. Visualizing the jetting structure usin...

Several investigations have been devoted towards understanding the coating process in fluidized beds. Most of these studies focused on spraying liquid droplets over the bed. However, due to the complexity of these systems, more investigations are still required to quantify the effect of operating conditions on the coating criteria. The present work aims at fundamentally understanding and pr...

Drying of green peas in a Fluidized Bed Dryer (FBD) with inert particle, heated by combined sources of hot air and InfraRed (IR) radiation, has been experimentally and theoretically studied. For this purpose, an experimental set up was constructed. This setup was composed of a cylindrical bed dryer containing some inert particles which are fluidized by hot air. Some infrared lamps were also pla...

A fluidized bed is being studied as a very promising method for mass production of IFE targets. Large beds could be filled with many targets to provide large-scale production, while a near-isothermal environment could be maintained in principle around each target (as required for smooth layering to meet the physics requirements on the ice characteristics) through the random movement and spin of...

the control of fluidized-bed operations processes is still one of the major areas of research due to the complexity of the process and the inherent nonlinearity and varying dynamics involved in its operation. there are varieties of problems in chemical engineering that can be formulated as nonlinear programming (nlps). the quality of the developed solution significantly affects the performance ...