Azodicarbonamide (Chemical Abstract Service Registry No 123.77.3) is an organic low molecular weight agent used for blowing and foaming plastics. Finely ground azodicarbonamide can be a pulmonary and sometimes a cutaneous acute sensitiser. Four cases of work related asthma are reported.

Due to its excellent mechanical properties and ultra-lightweight, Al-based foam with homogeneous small pore-structures has wide applicational prospects in many industrial fields. However, during the foaming process of molten Al, it is difficult manipulate pore structures by means ALPORAS© production route due violent gas-releasing performance TiH2 as a traditional agent. Herein, we developed me...

Fractured carbonate reservoirs account for 25% of world’s total oil resources and for 90% of Iranian oil reserves. Since calcite and dolomite minerals are oil wet, gas oil gravity drainage (GOGD) is known as the most influencing production mechanism. The most important issue within gas injection into fractured media is the channeling problem which makes the efficiency of gas injection process e...

Flotation deinking of old newsprint (ONP) using polydiallyldimethylammonium chloride (polyDADMAC) as the only deinking agent was studied. The results demonstrate that polyDADMAC can neutralize dissolved anionics to form small particles. These small particles, together with ink, filler, and fines, strongly adsorbed onto air bubble surfaces and functioned as particle foaming agents. Therefore, no...

in this paper, the properties and microstructure of foam glasses obtained from the wasted cathode ray tube (crt) display panels were investigated. the foam glasses were prepared at the temperatures of 850, 950 and 1050c using 2, 4, 6 and 8 wt.% silicon carbide (sic) as the foaming agent. the physical and mechanical properties of the samples including the density, porosity, four-point bending s...

The impact of increasing organic load on anaerobic digestion foaming was studied at both full and bench scale. Organic loadings of 1.25, 2.5 and 5 kg VS m(-3) were applied to bench-scale digesters. Foaming was monitored at a full scale digester operated in a comparable organic loading range over 15 months. The bench scale batch studies identified 2.5 kg VS m(-3) as a critical threshold for foam...

The design of porous metal structures is of high interest for novel lightweight industrial applications. Synchrotron tomography in combination with 3D image analysis is the suitable method to investigate these structures. In order to bring the foam production process from the laboratory to industrial scales a detailed knowledge of the control parameters’ influence on the resulting pore structur...

In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium silicate and NaOH), and foam was added to the geopolymeric mixture to produce lightweight concrete. The NaOH solution was prepared by dilute NaOH pellets with distilled water. The ...

Since the maximum foaming temperature window is only about 4 °C for supercritical CO₂ (scCO₂) foaming of pristine polypropylene, it is important to raise the melt strength of polypropylene in order to more easily achieve scCO₂ foaming. In this work, radiation cross-linked isotactic polypropylene, assisted by the addition of a polyfunctional monomer (triallylisocyanurate, TAIC), was employed in ...