the aim of the paper presented here is to develop the ti - micralloyed steel in otrer to oprtmize the mechanical properties after direct quenching from hot forging temperature. for this purpose, seven melts containing various amounts of titanium were prepared and cast in metal and sand molds. from the ingots, cast in metal mould, tractor links were produced by hot forging. the produced links we...

A widely used method for hot forming steels and alloys, especially heavy forging, is the process of multistage forging with pauses between stages. The well-known effect which accompanies multistage hot forging is metal plasticity recovery in comparison with monotonic deformation. A method which takes into consideration the recovery of plasticity in pauses between hot deformations of a billet un...

Global competition in the cold forging industry raises the significance of managing innovation and technological change. Strategies for development and application of new technology are extremely important for maintaining a competitive position and protecting sales. This paper reviews some of the advances in cold forging technology with an emphasis on the application of virtual process simulati...

In this study, SiC nanoparticles were added into matrix alloy through a combination of semisolid stirring and ultrasonic vibration while dynamic precipitation of second phases was obtained through multi-pass forging with varying temperatures. During single-pass forging of the present composite, as the deformation temperature increased, the extent of recrystallization increased, and grains were ...

Article history: Received: 08.11.2013. Received in revised form: 12.01.2013. Accepted: 14.01.2014. The grinding roller shaft is a key part of the grinding roller. It has a step-shaped shaft with different round cross-sections and 1850 mm × 1110 mm rectangular cross-section. If the general method of free forging is used, the upsetting diameter of ingot will reach 2900 mm, and 8400 t hydraulic pr...

The paper presents an investigation on the effect of process variables and material condition on forgeability of magnesium wrought alloys of Mg-Al-Zn group, AZ31, AZ61 and AZ91. The experimental work includes studies of forging capabilities of the alloys in closed-die forging at hot and warm-working temperatures. Forging tests are performed for material both in as-cast and asworked condition, f...

Influence of the constitutive flow law in FEM simulation of the Radial forging process. OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible. Radial forging is a widely used forming process for manufacturing hollow products in transport industry. As the deformation of the workpiece, during the process, is a c...

The knowledge-based system COFEX (Cold Forging Expert) has been developed to assist in the planning of the cold forging of a wide variety of tubular steel components. Following user-input of the required shape and dimensions of the finished forging, together with as many different sequences as desired, each operation is examined by the system by consulting the knowledge-base process rules and d...

Radial forging is an open die forging process used for reducing the diameters of shafts, tubes, stepped shafts and axles and also for creating internal profiles such as rifling the gun barrels. The radial forging of tube is usually performed over a mandrel to create an internal profile and/or size the internal diameter. Most of the previous studies conducted on the radial forging process have u...

Among the many input parameters of a forging process (for a multi-stage process one can count more than 200 different inputs!) the following important inputs shall be mentioned: Forging Material characteristics (flow curve = f(temperature, strain, strain rate, micro-structure) Influence of heat coefficients Friction type and friction value as well as lubrication Heat transfer Ambient media and ...