Microbial fuel cells (MFCs) with hydrophilic poly(vinyl alcohol) (PVA) separators showed higher Coulombic efficiencies (94%) and power densities (1220 mW m(-2)) than cells with porous glass fiber separators or reactors without a separator after 32 days of operation. These remarkable increases in both the coublomic efficiency and the power production of the microbial fuel cells were made possibl...

in this paper, labo3 perovskite type catalyst formulations were prepared by sol-gel auto combustion method using citric acid as the fuel. activity of catalysts was tested in catalytic oxidation of toluene as a model of volatile organic compounds. lacoo3 perovskite formulation showed the highest activity among labo3 (fe, mn and co) perovskite catalysts. so, lacoo3 perovskite based catalyst was s...

The control of crystallization of praseodymium barium copper iron oxide, an intermediate temperature solid oxide fuel cell cathode material, has been demonstrated for the first time using a biotemplated sol-gel synthesis technique. The results obtained showed significant improvement in purity, synthesis time, surface area and simplicity over that previously reported.

The aim of this study is to evaluate the influence of pH on the synthesis of nanocrystallines cobalt ferrite by combination of sol- gel auto combustion and ultrasonic irradiation methods. Two different fuels, urea and thiourea, along with metal nitrates (oxidant) were used to prepare CoFe2O4 powders. The morphology of the resulting powders was investigated. The powders wer...

In the EU countries a system is in place for marking and coloring fuel to distinguish different fuel tax class. Fiscal marker present in fuel does not change the color of fuel and it is determined by the reference method for the determination of the European Union euromarker (Solvent Yellow 124) in gas oil (method of high performance liquid chromatography, HPLC with detection by UV / DAD) 1. By...

nanocrystalline particles of barium hexaferrite has been prepared by the sol–gel auto- combustion method using iron and barium nitrate with a ba:fe molar ratio of 1:10. the effect of fuel such as citric acid and aspartic acid was investigated on the structure and magnetic properties of nanoparticles. the results revealed that the formation of barium hexaferritefine particles is influenced by mo...

Microbial fuel cells (MFCs) were successfully enriched using sludge contaminated with Cr(VI) and their characteristics were investigated. After enrichment, the charge of the final 10 peaks was 0.51 C +/- 1.16%, and the anodic electrode was found to be covered with a biofilm. The enriched MFCs removed 93% of 5 mg/l Cr(VI) and 61% of 25 mg/l Cr(VI). 16S rDNA DGGE profiles from the anodic electrod...

For propulsion systems using gel fuels, reducing the fuel viscosity is essential for achieving better atomization and combustion. In this paper, we investigate flow heat transfer in a water-gel with temperature shear dependent viscosity. We consider several different channels, mimicking transport of gelled fuels systems, also look at corrugation, which way enhancing fluid mixing thus improving ...

The relationship between the bacterial communities in anolyte and anode biofilms and the electrochemical properties of microbial fuel cells (MFCs) was investigated when a complex organic waste-decomposing solution was continuously supplied to MFCs as an electron donor. The current density increased gradually and was maintained at approximately 100 to 150 mA m(-2). Polarization curve analyses re...

Corn stover is usually treated by an energy-intensive or expensive process to extract sugars for bioenergy production. However, it is possible to directly generate electricity from corn stover in microbial fuel cells (MFCs) through the addition of microbial consortia specifically acclimated for biomass breakdown. A mixed culture that was developed to have a high saccharification rate with corn ...