Composite materials, such as glass fibre reinforced polymers (GFRPs), possess the advantages of high strength and stiffness, low density, as well as manufacturing flexibility; therefore, their potential in replacing conventional materials (such as concrete, aluminium and steel) in building construction has become attractive. One of the major issues that hinder the extensive use of composite str...

Fibres are generally used as resistance of cracking and strengthening of concrete. In this project, I am going to carry out test on steel fibre reinforced concrete to check the influence of fibres on flexural strength of concrete. According to various research papers, it has been found that steel fibres give the maximum strength in comparison to glass and polypropylene fibres. Hence, in this pr...

This paper presents a numerical study of the structural behaviour of concrete bridge deck slabs under static patch loads and dynamic traffic loads and an investigation of compressive membrane action (CMA) inside slabs. Those deck slabs were reinforced with Glass Fibre Reinforced Polymer (GFRP) bars. Non-linear finite element analysis (NLFEA) models were established using ABAQUS 6.10 software pa...

The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...

The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...

A far-field airborne radar (FAR) nondestructive testing (NDT) technique integrating inverse synthetic aperture radar (ISAR) measurements and a backprojection algorithm for the condition assessment of glass fiber reinforced polymer (GFRP)–wrapped concrete structures is proposed. The method is directed toward the detection of near-surface defects and delaminations located in the vicinity of GFRP–...