In the current work optimization of double pipe fin-pin heat exchanger has been studied. The effective parameters those are controlling the heat exchanger performance are divided in two categories; geometrical and operating conditions. Using the Brent’s optimization algorithm and handling the thermodynamically design concept, one can minimize entropy generation in different length of heat excha...

This paper investigates the transient heat conduction around the buried spiral coils which could be applied in the ground-coupled heat pump systems with the pile foundation as a geothermal heat exchanger. A transient ring-coil heat source model is developed, and the explicit analytical solutions for the temperature response are derived by means of the Green’s function theory and the image metho...

fridges are used in various industries, and heat exchanger is one of the main components of these systems; therefore, efficiency analysis of these systems is very important. in many fridges, frost over the heat exchanger tubes or pipes affects the system operation and reduces heat transfer between the refrigerant and ambient, so defrosting systems are usually used to enhance heat transfer. desi...

Knowledge of the ground thermal conductivity is of importance when designing borehole heat exchanger (BHE) systems. As thermal conductivity for any specific rock type varies due to its mineral content, porosity, pore fluid and anisotropy, it is preferable determined in-situ. Choudhary (1976) suggested a method for determining the thermal conductivity which analysed the heat transfer during the ...

One of world’s largest uses of energy is the heating and cooling of buildings. Ground Source Heat Pumps (GSHP) provide a more energy efficient way to meet building energy needs than conventional alternatives. At a relatively shallow depth, the ground temperature is nearly constant year round providing a reliable heat source or sink for the operation of a heat pump. The design of such systems is...

The ground heat exchanger is traditionally used as a heat source or sink for the heat pump that raises the temperature of water to about 50 ◦C to heat houses. However, in winter, the heating thermostat (temperature at which heating begins) in the Australian Nationwide House Energy Rating Scheme (NatHERS) is only 20 ◦C during daytime and 15 ◦C at night. In South-East Melbourne, the temperature a...