Rods of Ni-43.5wt% Ti alloy were prepared under various casting conditions. Specimens which were melted in a cordierite crucible and cast in a phosphate-bonded investment mold had less strength and elongation than those melted in a copper crucible and cast in a phosphate-bonded investment mold. All castings exhibited superelasticity at room temperature. The upper limit of recoverable strain was...

A Robotic System is being developed to automate the crucible packing process in CZ semiconductor wafer production. It requires the delicate manipulation and packing of highly irregular polycrystalline silicon nuggets, into a fragile fused silica crucible. For this application, a dual optical 3-D surface geometry measuring system that uses active laser triangulation has been developed and succes...

A method for the determination of the oxygen content in magnesium and magnesium alloys has been developed. Inert gas fusion-infrared absorptiometry was modified by introducing a multistep heating process; a sample containing oxygen is fused with tin to form an eutectic mixture at 900°C in a graphite crucible, followed by a subsequent gradual temperature increase of up to 2000°C, which enables t...

Y. Janssen, 2, ∗ M. Angst, K. W. Dennis, P. C. Canfield, 3 and R. W. McCallum 4 Condensed Matter Physics, Ames Laboratory, Ames, Iowa 50011, USA Materials and Engineering Physics, Ames Laboratory, Ames, Iowa 50011, USA Department of Physics and Astronomy, Iowa State University, Ames, Iowa 50011, USA Department of Materials Science and Enigineering, Iowa State University, Ames, Iowa 50011, USA (...

Non homogeneous particle distribution is one of the greatest problems in casting Metal Matrix Composites (MMC's). To optimize some of the parameters for uniform particle distribution for batch compocasting the present simulation studies were conducted. The simulation involves visualisation experiments. In the visualisation experiments liquid and semi solid aluminium are replaced by other fluids...

Data scientists have applied various analytic models and techniques to address the oft-cited problems of large volume, high velocity data rates and diversity in semantics. Such approaches have traditionally employed analytic techniques in a streaming or batch processing paradigm. This paper presents CRUCIBLE, a first-in-class framework for the analysis of large-scale datasets that exploits both...

An induction cold crucible melting is one of the most promising technologies for the reuse and decontamination of the radioactively contaminated metallic materials generated during the dismantling of nuclear facilities, because the crucible ensures a long life operation without generating secondary wastes. Fundamental equipment of the Melting and Recycling of Metals by Cold Crucible (MERC) proc...

This paper describes a method for removing oxide film from the surface of silicon wafers using an inert gas fusion impulse furnace and precise determination of bulk oxygen within the wafer. A silicon wafer was cut to about 0.35 g (6 x 13 x 2 mm) and dropped into a graphite crucible. The sample was then heated for 40 s at 1300 degrees C. The wafer's oxide film was reduced by carbon and removed a...