Size reduction and densification of lignocellulosic biomass feedstock play a crucial role in the preprocessing and supply of biomass. Size reduction is an operation where the size distribution of biomass particles is adapted to a level determined by its final use. The purpose of densification is to increase the bulk and inherent energy density of the biomass feedstock, allowing optimization of ...

Densification of cuboidal micrometer-sized lithium fluoride particles as ductile ceramic by spark plasma sintering (SPS) was investigated. Specimens were fabricated at different pressures and temperature conditions, ranging from 2 to 100 MPa at 500 C and from 200 to 700 C under 100 MPa of applied pressure, respectively. Dense specimens of 99 % relative density were fabricated by heating to 500 ...

Densification of oxide glasses at the glass transition offers a novel route to develop bulk glasses with tailored properties for emerging applications. Such densification can be achieved in the technologically relevant pressure regime of up to ~1 GPa. However, the present understanding of the composition–structure–property relationships governing these glasses is limited, with key questions, e....

In this study the effect of nano meter size ZrO2 particles on the microstructure, densification and hydration resistance of magnesite –dolomite refractories was investigated. 0, 2, 4, 6 and 8 wt. % ZrO2 particles that were added to magnesite –dolomite refractories containing 35 wt. % CaO. The Hydration resistance was measured by change in the weight of specimens after 72 h at 25℃ an...

Modelling the mechanical response of silica glass is still challenging, due to the lack of knowledge concerning the elastic properties of intermediate states of densification. An extensive Brillouin Light Scattering study on permanently densified silica glasses after cold compression in diamond anvil cell has been carried out, in order to deduce the elastic properties of such glasses and to pro...

In solid biofuel manufacture technological and material variables influence the densification process and thus also the final briquette quality. The impact of these technological variables, especially compression pressure and compression temperature, and also of the material parameters (particle size and moisture content) can generally be observed during biomass densification in the quality ind...

The effects of powder particle size on the densification and microstructure of iron powder in the direct laser sintering process were investigated. Iron powders with particle sizes ranging from 10 to 200 m were used. It was found that the sintered density increases as the laser energy input is increased. There is, however, a saturation level at which higher density cannot be obtained even at ve...

Besides advanced telecommunications techniques, the most prominent evolution of wireless networks is the densification of network deployment. In particular, the increasing access points/users density and reduced cell size significantly enhance spatial reuse, thereby improving network capacity. Nevertheless, does network ultra-densification and over-deployment always boost the performance of wir...

Using ZnO as a model system, the densification mechanisms of flash sintering are investigated. Controlled experiments via limiting the maximum current or the effective ramp rate suggest that both the maximum specimen temperature and the high heating rate (on the order of 200 C/s) are essential for the rapid densification during the flash sintering. Moreover, benchmarking rapid thermal annealing...

Evolution of cold dry snow and firn plays important roles in glaciology; however, the physical formulation of a densification law is still an active research topic. We forced eight firn-densification models and one seasonal-snow model in six different experiments by imposing step changes in temperature and accumulation-rate boundary conditions; all of the boundary conditions were chosen to simu...