Material properties and geometry are two important design parameters which their effects should be considered in a crashworthiness analysis. In this paper, the axial impact of metallic and hybrid energy absorbing thin-walled tubes with poly-gonal cross-section is simulated using LS-DYNA software. The combined effects of changing the geometry and material properties on the mass specific energ...

With careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thin films of stable retained austenite have exhibited impressive combinations of strength and toughness in highsilicon bainitic steels. The silicon suppresses the precipitation of brittle cementite leading to an improvement in toughness. The essential principles governing the optimisatio...

Due to the recent droughts, the retube of Sezela evaporators was delayed for a few years, resulting in a need for a low cost carbon steel tube to retube five evaporators. A recent failure highlighted the importance of the heat treatment and expansion characteristics of these tubes. This paper discusses the failure of a carbon steel tube, the development of the heat treatment of locally manufact...

recent tendencies in concrete technology have been towards to high- performance concrete with a low water-cement ratio. however, high performance concretes have some problems. one of the problems is early-age cracking due to autogenous shrinkage. this study presents the results of an experimental investigation carried out to evaluate the autogenous shrinkage of high-strength concrete. accordin...

Kevlar is a type of aramid fibers which is characterized by high strength to low weight ratio. This material is widely used in bulletproof vests and helmets, in which it creates a barrier to projectiles to protect specific objectives, laminated tubes and pressure vessels, etc. In this study the ballistic behavior of Kevlar /epoxy composite and Kevlar fabric is investigated. The results showed t...

The behavior of concrete-filled fiber tubes (CFFT) polymers under axial compressive loading was investigated. Unlike the traditional fiber reinforced polymers (FRP) such as carbon, glass, aramid, etc., the FRP tubes in this study were designed using large rupture strains FRP which are made of recycled materials such as plastic bottles; hence, large rupture strain (LRS) FRP composites are enviro...