Large volumes of naturally jointed Precambrian crystalline rock can be stably maintained at pressures considerably above the least principal earth stress in the surrounding rock mass. At Los Alamos National Laboratory’s Fenton Hill hot dry rock (HDR) geothermal test site, tests carried out for a cumulative period of 11 months in the deeper and larger of the two HDR reservoirs showed no evidence...

Based on elastic considerations, a new four parameter model of the hydrostatic compression curves of sandy soils is presented. Using a unique set of parameters, this model is capable of accurately representing the infinite family of compression curves that result when soil is subjected to stresses below particle breakage. The parameters are readily estimated from two hydrostatic tests conducted...

The specific growth rates of Escherichia coli and Bacillus cereus were measured for growth media in a flask, a lens-plate arrangement simulating an isolated capillary space, and a lens-plate arrangement under hydrostatic tensile stress. The specific growth rates of the bacteria were the same for the flask and lens-plate arrangement without hydrostatic tensile stress, but were enhanced when the ...

Displacements around a tunnel, occurring as a result of excavation, consist of the elastic and plastic parts. In this paper, we discuss the elastic part of displacements as a result of excavation, called net displacement. In general, the previous analytical solutions presented for determining the displacements around a circular tunnel in an elastic medium do not give the net displacements...

The macroscopic mechanical behaviour of granular materials is governed by microscopic features at the particle scale. Photoelasticimetry is a powerful method for measuring shear stresses in particles made from birefringent materials. As a complementary method, we here identify the hydrostatic stress networks through thermoelastic stress analysis using infrared thermographic measurements. Experi...

The dependence of Tc for MgB2 on purely hydrostatic or nearly hydrostatic pressure has been determined to 29 GPa for single-crystalline and to 32 GPa for polycrystalline samples, and found to be in good agreement. Tc decreases from 39 K at ambient pressure to 15 K at 32 GPa with an initial slope dTc=dP ’ 1:11ð2Þ K/GPa. Evidence is presented that the differing values of dTc=dP reported in the li...

In this work a method is presented that can be used to predict craze initiation in glassy polymers. The approach is based on the view that the development of a craze is preceded by de formation of a localised plastic deformation zone. As this zone develops, the hydrostatic stress increases, and, when exceeding a critical stress level, cavitation will take place, leading to local development of ...

The effect of mechanical stress on interdiffusion in a binary substitutional solid solution has been investigated from a theoretical point of view. Fick's first law, stating that the diffusional flux is proportional to the concentration (chemical potential) gradient, is the basic equation for diffusional mass transport. Limits of its validity, in particular in a state of non-hydrostatic stress,...

Based on the coupled thermo-mechanical model, a constitutive model for bulk metallic glasses (BMGs), which is generalized to the multi-axial stress state and considers the effects of free volume, heat and hydrostatic stress, has been modified in the present paper. Besides, a failure criterion of critical free volume concentration is introduced based on the coalescence mechanism of free volume. ...