Centrifugal compressors are most widely used in large capacity refrigeration and air conditioning plants. Its other applications include in gas turbines for air craft applications, diesel engine turbochargers, chemical and process industries, factory workshop air supplies etc. In refrigeration field these are suitable for high specific volume refrigerants or low pressure stages. They have been ...

A computational fluid dynamics (CFD) model that evaluates mechanical mixing in a full-scale anaerobic digester was developed to investigate the influence of sewage sludge rheology on the steady-state digester performance. Mechanical mixing is provided through an impeller located in a draft tube. Use is made of the Multiple Reference Frame model to incorporate the rotating impeller. The non-Newt...

This paper presents the optimization of vibrations of centrifugal pump considering fluid-structure interaction (FSI). A set of centrifugal pumps with various blade shapes were studied using FSI method, in order to investigate the transient vibration performance. The Kriging model, based on the results of the FSI simulations, was established to approximate the relationship between the geometrica...

A ventricular assist device (VAD), which is a miniaturized axial flow pump from the point of view of mechanism, has been designed and studied in this report. It consists of an inducer, an impeller, and a diffuser. The main design objective of this VAD is to produce an axial pump with a streamlined, idealized, and nonobstructing blood flow path. The magnetic bearings are adapted so that the impe...

A secondary nucleation model mainly based on the findings of Ottens (1973) and Evans (1974) considering both crystal-impeller collisions and crystal-crystal collisions was investigated using experimental data obtained from two crystallizers, a 22-liter Draft Tube (DT) crystallizer and an 1100-liter Draft Tube Baffled (DTB) crystallizer, which are both operated continuously in an evaporative mod...

In this paper, three dimensional flow characteristic was presented by a revision of an impeller of an axial turbo fan for improving the airflow rate and the static pressure. TO consider an incompressible steady three-dimensional flow, the RANS equations are used as the governing equations, and the standard k-ε turbulence model is chosen. The pitch angles of 44°, 54°, 59°, and 64° are implemente...

SUMMARY The aerodynamic design and experimental performance of a centrifugal compressor designed for a pressure ratio of 6.5 and a specific speed of 68 are described, The compressor consisted of a radially-vaned impeller and a transonic, vaned radial diffuser. At design speed a peak overall total-to-total isentropic efficiency of 0.746 was achieved at the maximum pressure ratio of 5.9, rising t...

This study presents a blower for air management system of fuel cell modules. A blower is composed of BLDC motor and impeller. Magnetic equivalent circuit model and finite element analysis are used to design the motor, and an improved structure is considered to reduce a mechanical loss induced from bearing units. Finally, air blower system combined with the motor and an impeller is manufactured ...

This paper deals with the design and performance analysis of centrifugal pump. In this paper, centrifugal pump is analyzed by using a single-stage end suction centrifugal pump. Two main components of a centrifugal pump are the impeller and the casing. The impeller is a rotating component and the casing is a stationary component. In centrifugal pump, water enters axially through the impeller eye...

A hybrid method for the simulation of Reynolds-averaged turbulent ̄ows in axial ̄ow impeller driven mixing vessels is described. The time-mean ̄ow in the impeller region is modelled using blade element theory, while the ̄ow in the remainder of the vessel is simulated using a second-order ®nite-volume Reynolds-averaged numerical scheme. The two models are iteratively coupled through boundary con...