In this paper, indium tin oxide (ITO) nanoparticles has been prepared by chemical methods under given conditions with solution of indium chloride (InCl3·4H2O), tin chloride (SnCl4·5H2O) in ammonia solution. The samples were characterized by X-ray Diffraction (XRD) and scanning electron microscopy (SEM) analyses after heat treatments. The SEM results showed that, the size of the ITO particles pr...

The use of indium compounds in the electronics and semiconductor industry has risen sharply from the 1990s, and indium demand increased to a record 335 tons in 2000 in Japan, which was about 5 times that in 1990. Indium-tin oxide (ITO) is a sintered alloy containing a large portion of indium oxide and a small portion of tin oxide, and is used in the making of thin-film transistor liquid crystal...

A novel process of fabricating various oxide nanostructures on glass substrates is described. Transparent porous alumina films ( 6–150 nm) were first formed in acid solutions by anodization of aluminum layers sputter-deposited on a glass plate coated with a tin-doped indium oxide film. The porous alumina structures after pore-widened were then used as a host or a template in a sol–gel process t...

Looking foward to the future where the device becomes flexible and rollable, indium tin oxide (ITO) fabricated on the plastic substrate becomes indispensable. Metallization on the ITO plastic substrate is an essential and required process. Electroplating is a cost-effective and high-throughput metallization process; however, the poor surface coverage and interfacial adhesion between electroplat...

Available online 19 November 2013

Epitaxial indium tin oxide films have been grown on both LaAlO3 and yttria-stabilized zirconia substrates using RF magnetron sputtering. Electrolyte gating causes a large change in the film resistance that occurs immediately after the gate voltage is applied, and shows no hysteresis during the charging/discharging processes. When two devices are patterned next to one another and the first one g...

C-dopedZnOhierarchically porous nanoarchitectures were synthesized in situ on indium tin oxide (ITO) through a counter strategy. The PECperformance of the C-doped ZnOnanoarchitectures in the splitting of water without sacrificial reagents was systematically evaluated for the first time. In comparison to other ZnO-based photoanodes in the literature, C-doped ZnO nanoarchitectures exhibit a strik...

Variable angle reflectance FTIR was used to investigate the reflectance of thin films of either indium tin oxide (ITO) or fluorine-doped tin oxide (SFO) on glass substrates in the mid-IR. The reflectance was observed to depend on the incident angle, wavenumber, and the polarization used. The Drude model and the Fresnel equations for reflection at a single dielectric boundary were used to interp...

This paper reports the effect of precursor concentration, growth temperature, and growth time on the size and density of ZnO nanowire arrays (ZNAs). The well-aligned ZNAs were grown on indium tin oxide substrate using a facile chemical bath deposition method. The results showed that the ZnO nanowires could be tailored to the desired sizes with a simple variation of the growth parameters. Optica...

The integration of gas sensor components into smart phones, tablets and wrist watches will revolutionize the environmental health and safety industry by providing individuals the ability to detect harmful chemicals and pollutants in the environment using always-on hand-held or wearable devices. Metal oxide gas sensors rely on changes in their electrical conductance due to the interaction of the...