Heat and vapour convective surface coefficients are required in practically all heat and vapour transport calculations. In building envelope research, such coefficients are often assumed constants for a set of conditions. Heat transfer surface coefficients are often determined using empirical correlations based on measurements of different geometry and flows. Vapour transfer surface coefficient...

heat transfer mechanisms and the solidification process are simulated for a continuous casting machine and the geometric shape of the liquid pool is predicted considering different conditions. a heat transfer and solidification model is described for the continuous casting of steel slabs. the model has been established on the basis of the technical conditions of the slab caster in the continuou...

turbulence structure on the gas side of a wavy stratified flow was experimentally investigated in a near horizontal 18.7 cm (h) 10 cm (w) 5.5m (l) rectangular duct.by applying the variable interval time averaging (vita) technique to the hot wire anemometer measurements frequency of occurrence of turbulent events were detected near the air-water interface. experimental results showed that freque...

correlation of heat transfer coefficients for air flow through the regenerator constructed from randomly paked spheres is reported for the symmetric-balanced mode of operation. the experimental results have been correlated by the least square regression has been obtained.the present correlation has been compared with the heat transfer coefficient correlations in the literature.

This paper presents the heat transfer coefficients measured during HC-290 (Propane) vaporisation inside a brazed plate heat exchanger: the effects of heat flux, saturation temperature (pressure) and outlet conditions are investigated. The heat transfer coefficients show weak sensitivity to saturation temperature (pressure) and great sensitivity to heat flux and outlet conditions. The saturated ...

Correlation of heat transfer coefficients for air flow through the regenerator constructed from randomly paked spheres is reported for the symmetric-balanced mode of operation. The experimental results have been correlated by the least square regression has been obtained.The present correlation has been compared with the heat transfer coefficient correlations in the literature.

This paper presents the heat transfer coefficients and the pressure drop measured during HC-600a (Isobutane) condensation inside a brazed plate heat exchanger: the effects of saturation temperature, refrigerant mass flux and vapour super-heating are investigated. The heat transfer coefficients show weak sensitivity to saturation temperature and great sensitivity to refrigerant mass flux. At low...

Nucleate pool boiling heat transfer coefficient have been experimentally measured on a horizontal rod heater for various liquid binary mixtures. Measurements are based on more than three hundred data points on a wide range of concentrations and heat fluxes. In this investigation, it has been confirmed that the heat transfer coefficient in boiling solutions are regularly less than those in p...