Slow and dense granular flows often exhibit narrow shear bands, making them ill suited for a continuum description. However, smooth granular flows have been shown to occur in specific geometries such as linear shear in the absence of gravity, slow inclined plane flows and, recently, flows in split-bottom Couette geometries. The wide shear regions in these systems should be amenable to a continu...

This article describes fretting behavior of zirconia and silicon nitride balls on an electro-deposited coating. Fretting tests are performed using a ball-on-flat configuration. The evolution of the kinetic friction coefficient is determined, along with slip ratio. Experimental results show that the steady-state friction coefficient between ceramic balls (Si₃N₄ and ZrO₂) and an electro-deposited...

Cf = skin friction coefficient CD = drag coefficient CDf = friction drag coefficient CDp = pressure drag coefficient h = step height M0 = freestream Mach number Patm = atmospheric pressure Pi = stagnation pressure Re = freestream Reynolds number Ti = stagnation temperature U = velocity U = normalized velocity Uτ = friction velocity X = longitudinal coordinate Z = vertical coordinate Z = normali...

In the discrete element simulation of granular materials, the modelling of contacts is crucial for the prediction of the macroscopic material behaviour. From the tribological point of view, friction at contacts needs to be modelled carefully, as it depends on several factors, e.g. contact normal load or temperature to name only two. In discrete element method (DEM) simulations the usage of Coul...

one of the main factors that cause to quality loss for fresh fruit market apples is bruise damage. amongst the factors that affect apple sensitivity to bruising, major one is drop height and area profile during the impact. in the present study, four iranian apple varieties consisted of atirli, kapak, kowse and paiez that were selected and 100 fruits of each variety were picked up, then apples w...

A calibration process is developed to determine the parameter values. Three-axial compressions tests in laboratory and neural network are used to determine the material internal friction angle and stiffness, respectively. These tests are repeated numerically using PFC models with different sets of particle friction coefficients and particle stiffness values. Three-axial compressions tests are f...

An effort is made to evaluate the formulation of seismic active earth pressure behind a nonvertical retaining wall supporting c-Ф backfill. The formulation is prepared to get a single critical wedge surface for simultaneous action of weight, surcharge, cohesion and adhesion. The success of any retaining structure involves the awareness of seismic active earth pressure. The effect of various par...

tan films with different n2 partial pressure were deposited on 304 stainless steel using the magnetron sputtering method. the effect of gas pressure on the mechanical property, morphology and phase structure of the films is investigated by x-ray diffraction (xrd), atomic force microscopy (afm), microhardness testing, friction coefficient measurements, and wear mechanism study. the xrd results c...

This paper describes a sliding friction model for an electro-deposited coating. Reciprocating sliding tests using ball-on-flat plate test apparatus are performed to determine an evolution of the kinetic friction coefficient. The evolution of the friction coefficient is classified into the initial running-in period, steady-state sliding, and transition to higher friction. The friction coefficien...