A class E power amplifier including coupling coils is proposed for application in a wireless power transfer system using magnetic coupling. The proposed amplifier is directly connected to the coils with no discrete components for harmonic filtering and dc feeding, which could cause efficiency degradation of the amplifier. The system with the differential amplifier shows 6.95 W of transmitted po...

Wavelet packet division multiplexing (WPDM) is a high-capacity, flexible and robust orthogonal multiplexing scheme in which the message signals are waveform coded onto wavelet packet basis functions for transmission. However, WPDM suffers from severe performance degradation in the presence of high-power amplifier (HPA) nonlinearities. In this paper, data predistortion using the pth-order Volter...

This research was to design a 2.4 GHz class E Power Amplifier (PA) for health care, with 0.18um Semiconductor Manufacturing International Corporation CMOS technology by using Cadence software. And also RF switch was designed at cadence software with power Jazz 180nm SOI process. The ultimate goal for such application is to reach high performance and low cost, and between high performance and lo...

In this paper, a resistive-reactive series of continuous inverse modes is proposed for extending bandwidth of the series of Inverse continuous mode (SICM). A broadband class inverse F power amplifier (PA), which operates across 2.5-4.1GHz (48.5% bandwidth), is designed by using bare GaN HEMT to prove this theory. Experiment results indicate that the PA mentioned above is able to output 9.1-18.4...

A highly efficient class E power amplifier is demonstrated for application to wireless power transfer system. The amplifier is designed with an L-type matching at the output for harmonic rejection and output matching. The power loss and the effect of each component in the amplifier with the matching circuit are analyzed with the current ratio transmitted to the output load. Inductors with a qua...

The design of A 2.4-GHz CMOS Class E cascode power amplifier (PA) for GSM applications in TSMC 0.18-μm CMOS technology present in this paper. Proposed Class E cascode PA topology is a single-stage topology in order to minimize the device stress problem. A parallel capacitor is connected across the transistors for efficiency enrichment also for dominating the effect of parasitic capacitances at ...

This paper deals with the modified wireless power transmission system for biomedical implanted devices. The system consists of efficient class-E power amplifier and inductive power links based on spiral circular transmitter and receiver coils. The model of the class-E power amplifier operated with 13.56 MHz is designed, discussed and analyzed in which it is achieved 87.2% of efficiency. The ind...

A digital look-up table adaptive predistortion technique using a six-port receiver for power amplifier linearization is presented. The system is designed in Ka-band for a DVB-S2 satellite link. We use a six-port receiver at the linearizationloop in place of classic heterodyne receivers. The six-port receiver is implemented by the use of passive microwavecircuits and detector diodes. This approa...

A linearized digital radio frequency (RF) power amplifier (PA), a switched RF PA, is more power efficient than an analog amplifier, but may cause interference in adjacent transmitting channels similar to analog amplifiers. This interference is due to the inherent nonlinearities, and this project investigated the possibility of reducing this interference by using a prefilter, a predistorter, to ...

A Class-E/Fodd high power amplifier (PA) using the distributed active transformer (DAT) is demonstrated at 29MHz. The DAT combines the output power from four VDMOS push-pull pairs. The zero voltage switching (ZVS) condition is investigated and modified for the Class-E/Fodd amplifier with a non-ideal output transformer. All lumped elements including the DAT and the transistor package are modeled...