Legislation arising from health and environmental concerns has intensified research into finding suitable alternatives to lead-based piezoceramics. Recently, solid solutions based on sodium potassium niobate (K,Na)NbO3 (KNN) have become one of the globally-important lead-free counterparts, due to their favourable dielectric and piezoelectric properties. This data article provides information on...

In this paper, a new lead-free piezoelectric (K,Na)NbO3 (KNN) film is presented as a promising, environment-friendly alternative to the conventional piezoelectric thin film materials like PZT, etc. with regard to applying into piezo-MEMS devices in general and micro-energy-harvesting devices in particular. The KNN films deposited by the RF magnetron sputtering deposition system were revealed ex...

Lead-free 0.98(Na0.5K0.5)NbO3-0.02Ba(Zr0.52Ti0.48)O3 [0.98NKN-0.02BZT] ceramics were fabricated by the conventional mixed oxide method with sintering temperature at 1,080°C to 1,120°C. The results indicate that the sintering temperature obviously influences the structural and electrical properties of the sample. For the 0.98NKN-0.02BZT ceramics sintered at 1,080°C to 1,120°C, the bulk density i...

Oxide interface engineering has attracted considerable attention since the discovery of its exotic properties induced by lattice strain, dislocation and composition change at the interface. In this paper, the atomic resolution structure and composition of the interface between the lead-free piezoelectric (K0.5Na0.5)NbO3 (KNN) thin films and single-crystalline SrTiO3 substrate were investigated ...

The CuO modified (Na0.52K0.48)NbO3 (NKN) piezoelectric ceramics were prepared by a solid-state reaction method. On the one hand, CuO doping can improve the densification behavior and simultaneously promote the grain growth, however, has little effect on the Curie temperature. On the other hand, the mechanical quality factor Qm obviously increases, the dielectric loss tanδ decreases, and the pie...

Acoustic emission (AE) sensors have been fabricated using both soft- and hard-type lead-free (Na0.5K0.5)NbO3-based ceramics. The acoustic and electromechanical properties of the ceramics have been determined using the resonance technique. The lead-free AE sensors were calibrated using a laser source and compared to a commercial sensor. A lead zirconate titanate (PZT) 5H ceramics AE sensor has a...

The origins of distinctive compositional dependence of relative permittivity, 計r, in the Pb-free piezoelectric system (1-x)Na0.5K0.5NbO3-xLiTaO3, x≤ 10 mol% modified with BiScO3 have been revealed using transmission electron microscopy with energy dispersive X-ray analysis (TEM-EDX). As the LiTaO3 content increased the Curie peak at ~370°C in 計r –T plots became more diffuse, and at x= 5 mol% an...

KxNa(1−x)NbO3 particles (KNN, 0 < x 1) were successfully synthesized through a facile glycothermal method by using KOH, NaOH and Nb2O5 as precursors 1,4-butanediol solvent at 200 °C for 12 h. The effects of varying the 1,4-butanediol/deionized water (B/W) volume ratio on growth behavior, morphological evolution, particle size KNN investigated. In order to obtain K0.5Na0.5NbO3 with morphotrop...