in this paper, the effect of cyclic loading on punching strength of flat slabs strengthened with carbon fiber reinforced polymer (cfrp) sheets is studied. experimental results of ten slab specimens under monotonic and cyclic loading are analyzed. eight specimens were strengthened with cfrp sheets on the tensile face of the slabs and the two other specimens were kept un-strengthened as control s...

Orthopaedic implants experience large cyclic loads, and pre-clinical analysis is conducted to ensure they can withstand millions of loading cycles. Acetabular cup developments aim to reduce wall thickness to conserve bone, and this produces high pre-stress in modular implants. As part of an implant development process, we propose a technique for preclinical fatigue strength assessment of modula...

Damage evolution during low cycle fatigue, creep, and their interaction behavior is actually a ductility exhaustion process in response to cyclic and static creep. In this article, a novel viscosity-based model for low cycle fatigue creep life prediction is presented in an attempt to condition viscosity-based approaches for general use in isothermal and thermo-mechanical loading. In this model,...

Low cycle fatigue–creep is the main reason for the failures of many engineering components under high temperature and cyclic loading. Based on the exhaustion of the static toughness and dissipation of the plastic strain energy during fatigue failure, a new low cycle fatigue–creep life prediction model that is consistent with the fatigue–creep damage mechanism and sensitive to the fatigue damage...

in this study, a researching program is conducted by cyclic triaxial test to determine the post-cyclic behavior of bushehr carbonate sand retrieved from the north of the persian gulf, under anisotropic consolidation at 200 kpa confining pressure. the article compares the post-cyclic monotonic strength and excess pore water pressures generated after the test with the pre-cyclic monotonic results...

This paper presents a low cycle fatigue life curve by simulating a crack in a cover plate welded moment connection. Initiation of ductile fracture in steel is controlled by growth and coalescence of micro-voids. This research used a numerical method using finite element modeling and simulation of ductile crack initiation by a micromechanical model. Therefore, a finite element model of a cover p...

this paper presents the results of a series of monotonic and post-cyclic triaxial tests carried out on a clay specimen and three types of clay-sand mixed specimens. the focus of the paper is on the post-cyclic mechanical behavior of the mixed specimens, as compared to their monotonic behavior. analyses of the tests results show that cyclic loading degrade undrained shear strength and deformatio...

carbonate materials are mostly found in tropical areas, where exploiting gas and oil resources are of high concern. their unique behavior under shear loading first was recognised during oil resources investigations in the persian gulf. off-shore structures have been placed on carbonate soils which are highly crushable.during storms cyclic loading imposes on the bases of structures lied down on ...

This paper deals with the development of loading protocols appropriate for cyclic testing in regions of low to moderate seismicity in Europe. To serve this goal, cumulative damage demands imposed by a set of 60 ground motion records, representative of a European moderate seismicity region for the 2% probability of exceedance in 50 years seismic hazard level, on a wide variety of SDOF systems ar...