The conventional ceramic route was utilized to prepare a hard magnetic powder (M-type strontium ferrite, SrFe12O19). The stoichiometric mixture of iron oxide and strontium carbonate were calcined at 1000C and then fired at various temperatures. The influence of various reaction parameters such as mixing ratio, calcination temperature, firing temperature and firing time on the magnetic behaviors...

Theoretical analysis has been carried out to establish the heat transport phenomenon of six different ferromagnetic MnZnFe2O4-C2H6O2 (manganese zinc ferrite-ethylene glycol), NiZnFe2O4-C2H6O2 (Nickel zinc ferrite-ethylene glycol), Fe2O4-C2H6O2 (magnetite ferrite-ethylene glycol), NiZnFe2O4-H2O (Nickel zinc ferrite-water), MnZnFe2O4-H2O (manganese zinc ferrite-water), and Fe2O4-H2O (magnetite fe...

in this work, mn ferrite nanopowders were prepared by co-precipitation method and were characterized. phase identification of the nanopowders was performed by x-ray diffraction method and the mean particle size of the nanopowders was calculated by scherrer's formula, using necessary corrections. magnetic parameters of the prepared nanopowders were measured by a vibrating sample magnetomete...

hard magnetic srfe12o19 (srm) nanoparticles were synthesized by a facile sonochemical reaction. the magnetic nanoparticles were then added to acrylonitrile-butadiene-styrene, polystyrene, polycarbonate, and poly sulfone to make magnetic nanocomposites. the magnetic properties of the samples were also investigated using an alternating gradient force magnetometer. the strontium ferrite nanopartic...

magnetic cofe2o4 nanoparticles were synthesized via a simple chemical reaction using precipitation method. the obtained materials consist of ferrite particles with average diameter of 25 nm. the effect of different surfactants such as cationic, anionic and neutral on the morphology of the products was investigated. scanning electron microscopy was used to study the structure and particle size o...

The lead ferrite (PbFe12O19) nanoparticles were prepared by a simple and short time microwave method. Lead nitrate, iron nitrate nine hydrate, surfactants, and ethylene glycol were used as precursor materials. The effect of surfactants on the morphology and particle size of the magnetic products was investigated. The prepared magnetic products were studied by X-ray diffraction, scanning electro...

Cobalt ferrite nanoparticles (CoFe2O4) are well known for some distinctive characteristics such as high magnetic permeability and coercive force, good saturation magnetization, excellent physical, and chemical stability, which make them so attractive for magnetic storage, magnetic resonance imaging (MRI), drug delivery, optical-magnetic equipment, radar absorbing materials...

Arsenic (As) in groundwater and surface water is a worldwide problem possessing a serious threat to public health. In this study, a magnetic ferrite, was synthesized and investigated for its As(V) removal efficiency. The adsorption of As(V) by magnetic ferrite exhibited an L-shaped nonlinear isotherm, suggesting limiting binding sites on the adsorbent surface. The As K-edge X-Ray Absorption Nea...

A small FMR ferrite disk strongly perturbs the cavity field. Graphical representation of the Poynting vector shows that due to the vortex structure the absorption cross-section of a ferrite particle can be much bigger than its geometrical cross-section. Spectral properties of magnetic oscillations in a ferrite disk show unique vortex structures for MS-wave functions.