Abstract: The investigation is carried out to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 nickel-chromium superalloy. The welds were produced using four types of filler materials: the nickel-based corresponding to Inconel 82, Inconel A, Inconel 617 and austenitic stainless steel 310. This paper describes the effects of aging treatment on the joint. The compara...

The effect of microstructural refinement and intercritical annealing on the mechanical properties and work-hardening response of a low carbon St12 steel was studied. It was revealed that intercritical annealing of the ferritic-pearlitic sheet results in the formation of a coarse-grained DP microstructure with discrete martensite islands normally formed in place of pearlitic colonies, which resu...

physical and mechanical properties of alfalfa (medicago sativa, l.) grind are required for optimum design of equipment used in transporting, processing and storage of the material. this study was conducted to determine the effect of particle size (2.38, 3.36 and 4.76 mm) and moisture content (8, 9.3 and 11% wb) on some physical and mechanical properties of alfalfa grind. these properties includ...

the development of nano/ultrafine bainitic structure in aisi 52100 steel was the goal of this study. for this purpose,the aisi 52100 the specimens were austenitized at 1050 °c for 60 min followed by low-temperature austemperingtreatment at different temperatures and times. the austempered samples were characterized using field emissionscanning electron microscopy (fesem), x-ray diffraction (xrd...

in the present study, the microstructure and mechanical properties of the dissimilar welding betweenastm a335 low alloy steel and er309l austenitic stainless steel were investigated using the gastungsten arc welding process. the welding of dissimilar materials between astm a335 low alloy steeland er309l austenitic stainless steel was found to have a significant effect on the microstructure when...

an artificial neural network (ann) model is developed for the analysis, simulation, and prediction of the austenite reversion in the thermo-mechanical treatment of 304l austenitic stainless steel. the results of the ann model are in good agreement with the experimental data. the model is used to predict an appropriate annealing condition for austenite reversion through the martensite to austeni...

in the present study, the mechanical properties and fracture mechanisms of two powder metallurgy low alloy steels, i.e. distaloy dh and distaloy hp, were investigated. all samples were sintered at 1120 ºc for 30 min in n2/h2 atmosphere. for evaluation of the effect of cooling rate on final properties, samples were cooled from sintering temperature with two different cooling rates. in addition, ...

the flow stress of steel depends significantly on microstructural changes taken place during hot deformation processes. in hot deformation processes, the flow stress of steel is influenced by two main metallurgical phenomena, i.e. recovery and recrystallization, along with its chemical composition and thermo-mechanical parameters. the final mechanical properties of steel are also determined by ...