A new class of PVDF-based membranes suitable for membrane distillation were prepared via electrospinning. The classical fiber morphology PVDF electrospun was changed to generate a beaded structure by tuning the solvent ratio and operating parameters during fabrication. Results showed that increasing N, N-Dimethylacetamide (DMAC) acetone used prepare solution, micron-sized beads can be created w...

direct contact membrane distillation (dcmd) which emerges as an alternative separation technology can effectively perform a colloidal separation process under thermal driven force. dcmd is capable of extracting pure water from aqueous solutions containing non-volatile nanoparticles through the hydrophobic microporous membrane when a vapour pressure difference was established across the membrane...

Electrospun membranes are gaining interest for use in membrane distillation (MD) due to their high porosity and interconnected pore structure; however, they are still susceptible to wetting during MD operation because of their relatively low liquid entry pressure (LEP). In this study, post-treatment had been applied to improve the LEP, as well as its permeation and salt rejection efficiency. Th...

Microporous membranes fabricated from hydrophobic polymers such as polyvinylidene fluoride (PVDF) have been widely used for membrane distillation (MD). However, hydrophobic MD membranes are prone to wetting by low surface tension substances, thereby limiting their use in treating challenging industrial wastewaters, such as shale gas produced water. In this study, we present a facile and scalabl...

Direct contact membrane distillation (DCMD) which emerges as an alternative separation technology can effectively perform a colloidal separation process under thermal driven force. DCMD is capable of extracting pure water from aqueous solutions containing non-volatile nanoparticles through the hydrophobic microporous membrane when a vapour pressure difference was established across the membrane...

A novel Janus membrane integrating an omniphobic substrate and an in-air hydrophilic, underwater superoleophobic skin layer was developed to enable membrane distillation (MD) to desalinate hypersaline brine with both hydrophobic foulants and amphiphilic wetting agents. Engineered to overcome the limitations of existing MD membranes, the Janus membrane has been shown to exhibit novel wetting pro...

Abstract In this study, an electrohydrodynamic atomization or electrospraying technique is used for the uniform deposition of carbon nanotubes (CNT) on a commercially available PTFE membrane and employed Membrane Distillation (MD) process. Modified PTFE-CNT was characterized water contact angle, liquid entry pressure (LEP), pore size distribution, surface morphology. The electrospray coating CN...

The possibility of applying membrane distillation to support the fermentation process was investigated. The capillary polypropylene membranes were assembled in the membrane modules. The studies were carried out using the standard solutions containing the compounds frequently occurring in the broths such as ethanol, citric, acetic and lactic acids, glycerol and 1,3-propanediol. The performance o...

Fouling and scaling in membrane distillation (MD) is one of the significant barriers to its continued growth. Fouling in MD blocks the pores, causing a decline in permeate flux, and may eventually lead to wetting of a hydrophobic membrane by the saline feed, contaminating the permeate. Many previous studies on MD have observed that while MD is more fouling resistant than reverse osmosis (RO), i...

Osmotically-driven membrane processes, including forward osmosis (FO) and pressure retarded osmosis (PRO), are emerging technologies that have come under renewed interest and subjected to numerous investigations in recent years. In FO, water is extracted from a feed solution utilizing the high osmotic pressure of a concentrated draw solution (DS) that flows on the opposite side of an FO membran...