a lab-scale cross flow membrane bioreactor (cf-mbr) was operated to determine the biokinetic coefficients under mlss concentrations of 5000 and 3000 mg/l. the investigation showed that the yield (y), the endogenous decay coefficient (kd), the maximum specific growth rate (μm) and the saturation constant (ks) were 0.276 mg/mg, 0.07 /day, 0.653 /day, and 396.62 mg cod/l respectively for mlss 5000...

The growing scarcity of fresh water is driving the implementation of wastewater treatment and water reuse on an increasingly large scale. Various methods have been developed and used for water reuse from wastewater; however, the membrane distillation (MD) process, as a promising separation technology, has recently gained more attention. The MD process is a non-isothermal membrane-based separati...

In this study, direct contact membrane distillation (DCMD) was used for treating fermentation wastewater with high organic concentrations. DCMD performance characteristics including permeate flux, permeate water quality as well as membrane fouling were investigated systematically. Experimental results showed that, after 12hr DCMD, the feed wastewater was concentrated by about a factor of 3.7 on...

we evaluated the efficacy of a full-scale combined biophysicochemical system for treatingmolasses-based bioethanol wastewater in terms of organic substances, nutrient, and dark brown color removal. the main organic removal unit, i.e., the upflow anaerobic sludge blanket (uasb) reactor, achieved 80.7% removal and 4.3 nm3 methane production per cubic meter of wastewater with a hydraulic retention...

oily wastewaters from oil refineries and oil distribution centers are one of the most important environmental concerns in recent decades; therefore, it is critical to treat these types of wastewaters. in this study, the performance of different polyethersulfone hollow fiber membranes in oily wastewaters treatment was investigated and the effects of operating conditions such as transmembrane pre...

the term 'membrane bioreactor' expresses a combination of activated sludge and membrane separation processes. the need to processes like sedimentation and disinfection used in common methods is eliminated through mbr systems in a way that membranes are placed into or out of an aeration tank and the vacuumed wastewater created by the suction pump is pulled up from inside the membranes and leaves...

In this study, polymer composite membranes comprising carbon nanotube (CNT), polysulfone (PSF) and polyvinyl alcohol (PVA) were synthesized via the phase inversion method and used to remove phenol from the phenol-containing wastewater. The fabricated membranes were reinforced with the functionalized carbon nanotubes (fCNTs) and coated with PVA to enhance their mechanical strength and anti-fouli...

Background: Considering the toxic effects of heavy metals and microbial pathogens in industrial wastewaters, it is necessary to treat metal and microbial contaminated wastewater prior to disposal in the environment. The purpose of this study is to assess the removal of heavy metals pollution and microbial contamination from a mixture of municipal and industrial wastewater using membrane biorea...

the aim of this research is performance evaluation of reverse osmosis method for treatment of ion exchange resins regeneration wastewater from a petrochemical complex in iran. currently this wastewater is discharged to evaporation lagoons after neutralization. thus, we need to set up a pilot plant which has membrane cell for treatment performance evaluation of three kinds of reverse osmosis mem...

The treatment of the yeast industry wastewater was investigated by nanofiltration (NF) membrane process on a pilot scale. Two wastewaters were used as feed: (i) dilute wastewater with COD 2000 mg/L and (ii) concentrate wastewater with COD 8000 mg/L. The permeate flux, COD retention, color and electrical conductivity (EC) removal were evaluated in relation to trans-membrane pressure and long-ter...