Introduction: Metal prostheses in patients affect the radiotherapy dose distribution. Metal prostheses with high density and atomic number cause major changes in scattering and attenuation of radiation. The present study aims to assess the impact of metal knee prosthesis with various dimensions and materials on radiotherapy dose distribution. Material and Methods: In this research, the Varian L...

The present paper describes a simple, selective and sensitive kinetic method for the determination of trace amounts of molybdenum(VI) based on its inhibitory effect on the reaction oxidation of 4-hydroxycoumarine by KMnO(4) in the presence of hydrochloric acid, at pH 1.75 at 25 degrees C. The rate of the indicator reaction was followed spectrophotometrically by measuring the decrease in the abs...

The surface chemistry of iodomethane is studied in ultrahigh vacuum using X-ray and Auger spectroscopies and temperature-programmed desorption, on a MoAl alloy film formed by reacting molybdenum hexacarbonyl with dehydroxylated alumina. The alloy is grown by reacting Mo(CO)6 with a thin alumina film on a molybdenum substrate at 700 K and heating to 1500 K. A portion of the iodomethane dissociat...

Bismuth–lithium alloys are considered as primary candidates for the reductive extraction step of on-line reprocessing a molten salt reactor fuel. The corrosion behavior pure metals and nickel-based was studied in liquid Bi–Li (5 mol.%) alloy at 650 °C. tantalum, molybdenum, corrosion-resistant VDM® Alloy C-4, Hastelloy® G-35®, KhN62M, 59 were prospective materials this metal media. rates determ...

The mechanism of secondary hardening in MP35N (Co–35Ni–20Cr–10Mo) alloy due to exposures at elevated temperatures has been studied. It was observed that short exposure to elevated temperatures increased the ultimate tensile strength and yield stress while decreasing the elongation of MP35N wires. Upon aging at temperatures from 300 to 900 C the elastic modulus increased although no changes in c...

The effects of Cr, Mo and W on the crevice corrosion of a number of commercial Ni-Cr-Mo (W) alloys in 1.0 mol/L NaCl were studied using the potentiodynamic-galvanostaticpotentiodynamic technique to measure film breakdown and repassivation potentials as well as protection temperatures. As expected, Cr is the key element determining resistance to crevice initiation but a substantial Mo alloy cont...