pure anatase titania (tio2), mixed 1.0 wt.% cerium-anatase titania (1.0 wt.%ceo2-tio2), and mixed 1.0 wt.% zirconia-anatase titania (1.0 wt.%zro2-tio2) nano powders were synthesized by co-precipitation method and characterized using x-ray diffraction (xrd), brunauer-emmett-teller (bet) surface area analysis, uv-vis diffuse reflectance spectroscopy (drs), and transmission electron microscope (te...

Nickel oxide (NiO) nano-particles were produced via a rapid microwave-assisted method. Ni(OH)2 precursor was obtained by slow drop-wise addition of 0.1M sodium hydroxide to 0.1M nickel nitrate. The mixture was vigorously stirred until the pH reached 7.2. The mixture was then irradiated with microwave to deposit Ni(OH)2 at an intensified precipitation rate. Drying of the precipitate at 320°C res...

Abstract In this project, nano-ZrO2 particles were dispersed in aluminum powder by a Y-shape mixer. The particle size of ZrO2 powder was < 40 nm and the amount of ZrO2 reinforcement varies from 3 to 15%.The mixed powders were compacted .Subsequently the compacted discs were sintered both in the microwave oven and in the conventional muffle furnace .Using microwave –assisted sintering method led...

Bacterial and viral contamination of touch surfaces allows for transmission of pathogens leading to increased risk of infection. Previous work has demonstrated the antimicrobial properties of copper for contact-killing of microbes for use in hospitals. Less research exists on copper as an antiviral surface and on the effects of nanomaterial copper surfaces in the contact-killing of viruses. Nan...

in this study, selenium was recovered from an industrial dust. after the purification process, the researchers were able to prepare selenium micro powder. the objective of this study was to prepare selenium nano particles by water solution phase method from the micro powders. the results showed that selenium micronized powder and nano particles had high purity. the obtained nanoparticles were t...

A wet-chemical etching method is reported for the scale-up preparation of carbon-coated hierarchical micro/nano porous silicon powders as a Li-ion battery anode, which shows no capacity fading at 1500 mA h g(-1) in 50 charge/discharge cycles.

-The present work is focused on the heterogeneous photocatalytic degradation of Amaranth dye over immobilized nano-crystals of TiO2. Immobilization has been an acceptable approach to overcome the drawbacks encountered with powder suspensions. Immobilization is performed using polyvinyl alcohol-formaldehyde binder. This method of immobilization does not require thermal heating at high temperatur...

So far, the antibacterial activity of some organic and inorganic compounds has been studied. Barium zirconate titanate [Ba(ZrxTi₁-x)O₃] (x = 0.05) nanoparticle is an example of inorganic materials. In vitro studies have provided evidence for the antibacterial activity of this nanoparticle. In the current study, the nano-powder was synthesized by sol-gel method. X-ray diffraction showed that the...

background: many attempts have been performed and continued for improvement of dental amalgam properties during last decades. the aim of present research was fabrication and characterization of amalgam/titania nano composite and evaluation of its corrosion behavior. materials and methods: in this experimental research, nano particles of titania were added to initial amalgam alloy powder and the...

The oxidation kinetics of 5 vol% nano-Ni dispersed Al2O3 with Si-doping (nano-Ni/Al2O3-Si) was studied in the present paper. The starting powder mixture was prepared by drying aqueous slurry consisting of alumina with nickel nitrate and Si (OCH3)4. The powder mixture was reduced at 600 C for 12 h in a stream of Ar-1%H2 gas mixture. Nano-Ni/Al2O3-Si was densified by pulsed electric current sinte...