Bulk ultrafine grained (UFG)/nanocrystal metals possess exceptional strength but normally poor ductility and thermal stability, which hinder their practical applications especially in high-temperature environments. Through microalloying strategy that enables the control of grains and precipitations in nanostructured regime, here we design and successfully produce a highly microstructure-stable ...

In the present study, Thermo-Reactive Deposition method (TRD) in a molten bath was used to form niobium carbide coating on AISI L2 steel. The coating was formed in five different composition of borax (Na2B4O7), boric acid (B2O3), and ferro-niobium. For all of the five compositions of molten bath, niobium carbide coating treatment was carried out at 1173 K, 1273 K, and 1373 K for 2, 4 and 8 hour...

A study was made of the preparation of a uranium 10 w/o niobium alloy by the bomb reduction of a suitable form of niobium and uranium tetrafluoride with calcium. A compound with a probable formula of Na2NbOF5 proved to be most satisfactory as the source of niobium. High yields and good metal-slag separations were obtained. Chemical analysis and density determinations showed the composition to b...

(Abstract) Niobium thin films are expected to be free of solid inclusions commonly seen in solid niobium. For particle accelerators, niobium thin film has the potential to replace the solid niobium in the making of the accelerating structures. In order to understand and improve the superconducting performance of niobium thin films at cryogenic temperature, an energetic vacuum deposition system ...

Micro-alloyed steel components are used in automotive industry for the necessity to make the manufacturing process cycles shorter when compared to conventional steel by eliminating heat treatment cycles, so an important saving of costs and energy can be reached by reducing the number of operations. Microalloying elements like vanadium, niobium or titanium have been added to medium carbon steels...

The use of liquid-liquid extraction for the separation of tantalum from niobium was demonstrated. Tantalum and niobium spectrographically free of each other were prepared in quantity on a continuous basis.

We report on a 850 GHz SIS heterodyne receiver employing a RF tuned niobium tunnel junction with a current density of 14kA/cm2, fabricated on a 1 μm Si3N4 supporting membrane. Since the mixer is designed to be operated well above the superconducting gap frequency of niobium (2 /h ≈ 690 GHz), special care has been taken to minimize niobium transmission line losses. Both Fourier Transform Spectro...

Metallic niobium powder was produced for applications in electric capacitors via calciothermic reduction of niobium hydroxide in molten CaCl2. Sub-micrometer spherical metallic particles with coral-like morphologies reflected the particle size of the starting oxide powder. A fine powder was obtained from the mixtures of niobium hydroxide and CaO or Ca(OH)2, respectively. Sintered pellets of the...

A method for bonding a niobium wire to a niobium thin film i s described The bonds are to be used as superconducting connections between wire-wound gradiometers and thin-film coupling coils on oc SOUIOS. The method is characterized by two steps. Firstly. the hardness of the niobium wire is reduced by a heat treatment. Secondly, the niobium film is covered with a thin layer of palladium to preve...