This paper introduces an approach to near timeoptimal control for synchronous buck dc–dc converters. The proposed proximate time-optimal digital (PTOD) controller is a combination of a constant-frequency pulsewidth modulation (PWM) controller employing a linear PID compensator close to a reference point, and a linear or nonlinear switching surface controller (SSC) away from the reference, toget...

Cross regulation is the main technical drawback of a Single-Inductor Multiple-Output (SIMO) dc-dc converter. This paper proposes a multivariable digital controller to suppress the cross regulation of a SingleInductor Dual-Output (SIDO) buck converter in Continuous Conduction Mode (CCM) operation. The controller design methodology originates from the open-loop shaping of the Multi-Input Multi-Ou...

This paper presents a transformer less ac/dc converter which can be used in voltages between 90230 Vrms. Instead of a transformer, this topology consists of a buck dc/dc converter and a buck boost dc/dc converter. By the absence of transformer, reduce the complexity of converter and it is cost effective. Buck dc/dc converter keeps o/p voltage below the line voltage; limit the leakage current. B...

The main objective of this paper is to compare the performance between fuzzy controller and proportional integral controller in improving the performance of the DC-DC Buck Converter. The evaluation of the output has been carried out and compared by software simulation using MATLAB. This paper also evaluates the stability of the system with fuzzy controller and PI controller and concludes that t...

Design, Simulation and experimental analysis of closed loop time domain based Discrete PWM buck-boost converter are described. To improve the transient response and dynamic stability of the proposed converter, Discrete PID controller is the most preferable one. Discrete controller does not require any precise analytical model of the system to be controlled. The control system of the converter i...

Abstract—The power buck converter is the most widely used DC/DC converter topology. They have a very large application area such as DC motor drives, photovoltaic power system which require fast transient responses and high efficiency over a wide range of load current. This work proposes, the modelling of DC/DC power buck converter using state-space averaging method and the current-mode control ...

In this paper, sliding mode control (SMC) for a bidirectional buck/boost DC-DC converter (BDC) with constant frequency in continuous conduction mode (CCM) is discussed. Since the converter is a high-order converter, the reduced-order sliding manifold is exploited. Because of right-half-plan zero (RHPZ) in the converter’s duty ratio to output voltage transfer function, sliding mode current...

In this paper, a Maximum Power Point Tracking (MPPT) controller for solar power system is modeled using MATLAB Simulink. The model consists of PV module, buck converter, and MPPT controller. The contribution of the work is in the modeling of buck converter using equation model approach rather than circuit model one. The buck converter model is developed using equation model that allowing the in...

Passivity{based feedback controllers are derived for the indirect stabilization of the average output voltage in Pulse{Width{Modulation (PWM) controlled dc{to{dc power converters of the \boost", \buck{boost" and \buck" types. The controller design is carried out on the basis of well known average PWM models of such circuits. These models are shown to be Euler{Lagrange systems corresponding to a...

In this paper, a novel approach for control of the DC-DC buck converter in high-power and low-voltage applications is proposed. Designed method is developed according to state feedback linearization based controller , which is able to stabilize output voltage in a wide range of operation. It is clear that in high-power applications, parasitic elements of the converter may become comparable with...