the development of a conceptual model that best accounts for the different parameters influencing lnapl fate and transport in groundwater is ultimate the key to a successful simulation of lnapl concentration in groundwater. characterization of hydrocarbon sources and identification of areas with heavy lnapl loadings from point and non-point sources is important for land use planners and environ...

with the growing population and density in metropolitan areas, higher tendency to live in high-rise buildings, and increasing demand for parking lots, it seems necessary to excavate soil to construct underground spaces. during excavation work, as the height of the wall increases, special care should be taken to the wall stabilization to avoid any consequent damage including extensive property d...

in this study, the capabilities of wawewatch-iii and mike21-sw for predicting the characteristics ofwind-generated waves in hormuz strait are evaluated. the numerical models have been set up using input data including gfs wind with 5° spatial resolution and 6 hours time intervals, along with the etopo1 bathymetry data with 2 arc-minute spatial resolutions. the results of the two model simulatio...

Representation and modeling of economic uncertainty is addressed by different modeling methods, namely stochastic variables and probabilities, interval analysis, and fuzzy numbers, in particular triple estimates. Fo-cusing on discounted cash flow analysis numerical results are presented, comparisons are made between alter-native modeling methods, and characteristics of the methods are discussed.

The expansion of the settlement trough is an important factor in the risk assessment of the tunneling induced settlement. The increase of settlement trough requires buildings to be included in the impact zone, which causes damages. This paper conducts estimation of the settlement trough width (STW) using empirical approaches, field measurement data and numerical solutions. The credibility of th...

a new three-dimensional unit cell model has been developed for modeling three constituent phases including inclusion, interphase and matrix. the total elastic modulus of nano-composite is evaluated.  numerical results are in good agreement with the previous proposed theoretical modeling. higher matrix and inclusion elastic modulus both can dramatically influence the total elastic modulus.

In this paper, numerical simulation of FRP composite cylinder tubes progressive crushing processes is conducted using LS-Dyna. Details on the numerical modeling strategy are given and discussed. It is found that triggers introduced in the numerical simulation can effectively model the bevel trigger at the end of the tubular specimens. It is also found that two-layer finite element model based o...

in this paper, a modeling tool for risk assessment analysis of the movement of hydrocarbon contaminants in the vadose zone and mass flux of contamination release into the groundwater table was developed. also, advection-diffusion-reaction equations in combination with a three-phase equilibrium state between trapped air, soil humidity, and solid particles of unsaturated soil matrix were numerica...

deformation pattern of the northeastern part of the iranian-arabian collision zone (i.e., mainly sanandaj-sirjan belt or zone) is the main concern of this paper. here, we investigate the stress distribution and displacement pattern of eghlid-deh bid area as affected by the position of zagros suture using a three dimensional mechanical model. the modeled area is located between the zagros thrust...