The effects of groundwater flow and biodegradation on the long-distance migration of petroleum-derived benzene in oil-bearing sedimentary basins are evaluated. Using an idealized basin representation, a coupled groundwater flow and heat transfer model computes the hydraulic head, stream function, and temperature in the basin. A coupled mass transport model simulates water washing of benzene fro...

The knowledge and the forecast of the parameters which rule the downflow models in oil extraction and transport are today of paramount importance. In particular the extracted oil is mixed with water and gas in rates which differ not only from different wells, but also on the same well during its life. The main problems involved with the measurement of the flow rates are : well exhaustion, criti...

For a rolling piston type of rotary compressor, oil supply system consisting of individual lubrication elements such as pumps, oil passages, and sliding surfaces has been modeled by employing equivalent electric circuit. Numerical solutions of the oil network model include total oil flow rate into the shaft hole, oil flow rates to various sliding surfaces, and oil leaks through roller end clear...

In response to the urgent need for estimates of the oil and gas flow rate from the Macondo well MC252-1 blowout, we assembled a small team and carried out oil and gas flow simulations using the TOUGH2 codes over two weeks in mid-2010. The conceptual model included the oil reservoir and the well with a top boundary condition located at the bottom of the blowout preventer. We developed a fluid pr...

Compressor suction and discharge lines in refrigeration systems must be designed to move compressor lubricants along the pipeline. This paper presents experimental and analytical results that describe the characteristics of two-phase, viscous liquid flows. Smooth-walled, flat plate test sections have been designed to allow flow visualization studies of the oil flow in different flow orientation...

The unstable flow with rotating-stall-like (RS) effects in a rotor-cascade of an axial compressor was numerically investigated. The RS was captured with the reduction in mass flow rate and increasing of exit static pressure with respect to design operating condition of the single rotor. The oscillatory velocity traces during the stall propagation showed that the RS vortices repeat periodically,...

in this study, the performance of an irreversible regenerative brayton cycle is sought through power maximizations using finite-time thermodynamic concept in finite-size components. optimizations are performed using a genetic algorithm. in order to take into account the finite-time and finite-size concepts in the current problem, a dimensionless mass-flow rate parameter is used to deploy time v...

An analytical study was carried out to investigate the performance of an oil supplying system of a variable speed compressor using a commercial CFD program. The simulations for the oil supplying system with the oil and air mixture were performed by varying compressor speed from 40 Hz to 90 Hz. Comparing the predicted with the measured data on the modified scroll compressor validated the simulat...

An analytical investigation is conducted to study the unsteady free convection heat and mass transfer flow through a non-homogeneous porous medium with variable permeability bounded by an infinite porous vertical plate in slip flow regime while taking into account the thermal radiation, chemical reaction, the Soret number, and temperature gradient dependent heat source. The flow is considered u...