In most cases, structural engineers assume a concrete floor to be a rigid diaphragm. Although this simplification is in most cases acceptable, it should be noted that such an assumption may be distrusted due to certain problems. Concrete structures with staggered shear walls are among those whose analysis should be conducted with special concern for the behavior of their floor diaphragms. Howev...

Masonry infill has been widely used as building material due to its cost effectiveness and availability.  The failure of these masonry infill walls during the past earthquakes have underscored the importance of ensuring the safety of the infill walls when it is subjected to lateral loads. In-plane and out of plane failures have been observed in many reinforced concrete framed building with maso...

In most cases, structural engineers assume a concrete floor to be a rigid diaphragm. Although this simplification is in most cases acceptable, it should be noted that such an assumption may be distrusted due to certain problems. Concrete structures with staggered shear walls are among those whose analysis should be conducted with special concern for the behavior of their floor diaphragms. Howev...

During recent years, the use of fiber-reinforced polymers (FRP) as a desirable alternative for improving the behavior of lateral resisting system are known. There are various factors influencing the quality of such kind of rehabilitation. This study aims to investigate the influence of geometric characteristics and arrangement of FRP layers on rehabilitating of concrete shear walls.  A few rein...

Abstract—R.C.C. buildings with dual structural system consisting of shear walls (or braces) and moment resisting frames have been widely used to resist lateral forces during earthquakes. The dual systems are designed to resist the total design lateral force in proportion to their lateral stiffness. The response of combination of braces and shear walls has not yet been studied. The combination m...

Geosynthetic reinforced soil (GRS) walls and abutments are increasingly used to support transportation infrastructure. A pressing question in their response is the amount of horizontal deflection expected under service loads. This paper presents an evaluation of six methods for predicting the lateral deformation of GRS walls and abutments, namely the FHWA, Geoservice, CTI, Jewell-Milligan, Wu, ...

composite concrete-steel plate shear walls are the most critical resisting structural members that resist lateral and axial loads. This type of wall consisting of two steel faceplates presenting the outer skin, infill concrete and shear connectors which are used to provide the composite action of the steel faceplates with infill concrete in order to increase the strength and to reduce the local...

BACKGROUND Obstructive Sleep Apnea (OSA) is a potentially life-threatening condition in which there is a periodic cessation of breathing (for 10 sec or longer) that occurs during sleep in the presence of inspiratory effort. The aim of the study was to assess volumetric and dimensional differences between OSA patients and normal individuals in the upright posture. MATERIAL AND METHOD The prese...