This paper presents a piezoelectric energy harvesting system demonstrating the output power enhancement when using a CMOS integrated pulsed-resonance converter (PRC) instead of a simple Schottky diode bridge rectifier. The combination of a storage capacitor, a blinking light emitting diode (LED) and a voltage detector forms a fixed voltage regulator and visualizes the output power extracted out...

In this paper, there is a combined approach which is used to compensate three stage amplifiers with ultra large capacitive loads and low power, using current mirror amplifier with split output is to decrease the occupied level of compensation capacitor that causes to lessen the occupied level of chip –area for using compensation capacitor and getting resulted in the light of better slew rate (S...

Studying and analyzing the ageing mechanisms of electronic components avionics in systems such as the GPS and INAV are of critical importance. In DC-DC power converter systems electrolytic capacitors and MOSFET’s have higher failure rates among the components. Degradation in the capacitors under varying operating conditions leads to high ripples output voltages and currents affecting downstream...

Nowadays, because of the need to decrease fuel consumption and greenhouse gas emissions and also their capability of exchanging power with the grid and regulating the frequency and voltage of the grid at different times of the day, electric vehicles are used more than before all across the world. It is highly important to pay attention to the efficiency, and decrease in the weight and volume of...

We have constructed a hypothetical charge pump which converts solar energy into DC electricity. The output is generated by cyclic changes in the capacitance of a circuit, which transfers charge from a low to a high voltage. The electric field across the capacitor must be of the order of 10Vm 1 to compete with efficiencies of photovoltaics. We have modeled the output using a liquid crystal elast...

A high step-up DC-to-DC converter that integrates an isolated transformer and a switched-clamp capacitor is presented in this study. The voltage stress of the main power switch should be clamped to 1/4 V by using the turn ratio and switched-clamp capacitor of an isolated transformer to achieve a high voltage gain. In addition, a passive clamp circuit is employed reduce voltage stress on the mai...

This paper presents an Inductive Power Transfer (IPT) system design using a Class E converter circuit. The Class E converter is used to drive a nonlinear load and theoretically it offers 100% efficiency. To be specifically, the performance of IPT system at 1MHz operating frequency and 9V DC supply voltage is analyzed. Voltage doubler rectifier and Darlington circuit are proposed in this paper t...

In very deep submicron technologies, the parasitic capacitor and resistance can have a significant impact on propagation delay and functional failure. Several methods consist in evaluating the output delay or giving an approximation of the output signal. These methods are really simple and are easily used in timing analysis. However, they are unusable in functional failure analysis such as cros...

The radiation produced when a relativistically moving plasma/gas boundary ~i.e., an ionization front! passes between alternatively biased capacitor electrodes is studied. Results of an experiment based on a design which incorporates the capacitor electrodes into an X band waveguide are presented. The waveguided design effectively couples nearly three orders of magnitude more power into the outp...