The most widespread method applied for standardization of milk protein in cheese production isultrafiltration. In the current study, pasteurized, unhomogenized whole milk was ultrafiltered with APVultrafiltration system, 51 spiral wound, polysulfone membrane with 20000 Da molecular weight cut off (DDS,Nakskov, Denmark) at 50 ˚C, such that the pressure difference between the two sides of membran...

A novel configuration of pervaporation and vapor permeation processes is introduced. In the suggested process the driving force for permeation is enabled by the absorption of the permeate vapors using a suitable solvent with a low vapor pressure. Thus, the refrigeration needed for condensing the permeate under vacuum can be overcome and cost savings can be achieved. Moreover, very low vacuum pr...

Pervaporation (PV) is a well-established membrane technique used in separation; especially dehydration of organic solvents. Along with other parameters such as permeate pressure and feed temperature; feed composition is an important parameter, which affects separation characteristics and membrane performance in pervaporation. In this paper, the separation characteristics of a hydrophilic polyvi...

In this work, the effects of permeate pressure and feed flow rate on the performance of a composite polyvinyl alcohol (PVA) membrane in the removal of benzene from gasoline by pervaporation (PV) were evaluated. The results indicate the remarkable effect of permeate pressure on membrane performance as reducing permeate pressure (higher vacuum) from 30 to 3 mmHg causes the total flux to increase ...

The purpose of this work was to analyse the potentialities of an integrated membrane system for the recovery, purification and concentration of polyphenols from olive mill wastewater (OMW). The proposed system included some well-known membrane operations such as microfiltration (MF) and nanofiltration (NF), as well as others not yet investigated for this specific application, such as osmotic di...

A mathematical model is derived to simulate the performance of spiral wound membrane modules for the pervaporative separation of binary liquid mixtures. Permeation through the polymer membrane is described by a detailed solution–diffusion model. Flory–Huggins theory is used to predict solubility of the penetrants, while the composition and temperature dependence of the diffusion coefficients ar...

In this study, direct contact membrane distillation (DCMD) was used for treating fermentation wastewater with high organic concentrations. DCMD performance characteristics including permeate flux, permeate water quality as well as membrane fouling were investigated systematically. Experimental results showed that, after 12hr DCMD, the feed wastewater was concentrated by about a factor of 3.7 on...

the effects of operating parameters such as feed temperature and permeate-side pressure on the performance of a commercial pva membrane in the dehydration of toluene by a pervaporation (pv) membrane system is studied in the present work. the results obtained indicate that increasing temperature in the range of 40 to 70 °c and reducing permeate pressure in the range of 1 to 10 mmhg increase memb...