Five methods are introduced for design of castellated I beams encased in concrete. One of the methods, plastic analysis, is thoroughly explained and the relevant equations are developed. Eight castellated I beams encased in concrete are made and tested. The theoretical design methods are all compared with the test results and the safety factor for each method is calculated. The results show tha...

High Performance Fiber Reinforced Cementitious Composite (HPFRCC) materials exhibit strain hardening behavior with multiple cracking under tensile loading. In this paper, experimental and parametric studies are performed to assess the influence of using HPFRCC material instead of normal concrete in reinforced concrete beams. After calibrating the experimental results, the analytical results inc...

high performance fiber reinforced cementitious composite (hpfrcc) materials exhibit strain hardening behavior with multiple cracking under tensile loading. in this paper, experimental and parametric studies are performed to assess the influence of using hpfrcc material instead of normal concrete in reinforced concrete beams. after calibrating the experimental results, the analytical results inc...

this paper presents the results of analytical studies concerning the flexuralstrengthening of reinforced concrete beams by external bonding of high-strength lightweightcarbon fiber reinforced plastic (cfrp) plates to tension face of the beam. three groups of beamswere tested analytically and compared with existing experimental results. results of the numericalanalyses showed that, although addi...

Plastic cracking of concrete such as plastic settlement and plastic shrinkage cracking is directly related to the bleeding of concrete, which is a natural time-dependent process in a fresh concrete mix. A portion of the mixing water together with very fine materials finds its way to the surface of the concrete during this process. The rapid rate of initial bleeding slows down with the elapsed t...

three unconventional details for plastic hinges of bridge columns subjected to seismic loads were developed, designed, and implemented in a large-scale, four-span reinforced concrete bridge. shape memory alloys (sma), special engineered cementitious composites (ecc), elastomeric pads embedded into columns, and post-tensioning were used in three different piers. the bridge model was subjected to...

This paper describes a web-based finite element program called portal of damage. The purpose of the program is the numerical simulation of reinforced concrete framed structures, typically buildings, under earthquakes or others exceptional overloads. The program has so far only one finite element based on lumped damage mechanics. This is a theory that combines fracture mechanics, damage mechanic...

In recent decades, the use of self-consolidating concrete has become widespread. Hence, recognizing the various properties of self-consolidating concrete are essential. In this study, several mixture designs have been tested and final mixture design of crushed tile aggregates which were replaced by 0%, 25 %, 50%, and 100% volume percentage of natural aggregates were conducted. To evaluate fresh...

The disposal of ready mixed concrete truck wash water and returned plastic concrete is a growing concern for the ready mixed concrete industry. Recently, extended set-retarding admixtures, or stabilizers, which slow or stop the hydration of portland cement have been introduced to the market. Treating truck wash-water or returned plastic concrete with stabilizing admixtures delays its setting an...

The main objective of this study is to evaluate the workability of fresh portland cement concrete while it is still in the mixing truck by determining fundamental rheological parameters (plastic viscosity and yield stress). Nine concrete mixtures with different values of yield stress and plastic viscosity were tested in a concrete truck. The measurements made with the truck were based on the ty...