To generate products containing a stable form of clarithromycin (CAM) (form II) regardless of the initial crystal form of CAM or type of granulation solvent, the effects of five surfactants, or a water-soluble polymer (macrogol 400) were determined on the crystal transition of CAM. The metastable form (form I) was kneaded with water, after adding surfactants, or a water-soluble polymer. Form II...

The motivation of this study is to determine if small amounts of designer additives placed at the polymer-fullerene interface in bulk heterojunction (BHJ) solar cells can influence their performance. A series of AB-alternating side-chain-functionalized poly(thiophene) analogues, P1-6, are designed to selectively localize at the interface between regioregular poly(3-hexylthiophene) (rr-P3HT) and...

Any assessment of plastic contamination in the marine environment requires knowledge of the polymer type and the additive content of microplastics. Sequential pyrolysis-gas chromatography coupled to mass spectrometry (Pyr-GC/MS) was applied to simultaneously identify polymer types of microplastic particles and associated organic plastic additives (OPAs). In addition, a scanning electron microsc...

Thanks to their many favorable advantages, polymer solar cells exhibit great potential for next-generation clean energy sources. Herein, we have successfully designed and synthesized a series of new fluorinated benzothiadiazole-based conjugated copolymers PBDT(TEH)-DT(H)BTff (P1), PBDT(TEH)-DT(EH)BTff (P2), and PBDT(HDO)-DT(H)BTff (P3). The power conversion efficiencies of 4.46, 6.20, and 8.30%...

We reviewed recent advances in high-performance organic field-effect transistors (OFETs) based on organic semiconductor/insulator polymer blends. Fundamental aspects of phase separation in binary blends are discussed with special attention to phase-separated microstructures. Strategies for constructing semiconductor, semiconductor/dielectric, or semiconductor/passivation layers in OFETs by blen...

1. Macromolecules and Polymers 2. Synthesis of Polymers 3. Structure of Macromolecules 4. Structure of Polymers 5. Design of Polymers with Specific Properties 6. Mechanical Properties of Polymers 7. Rheology and Viscoelasticity of Polymers 8. Electric and Optical Properties of Polymers 9. Additives 10. Polymer Processing 11. Polymers and the Environment 12. Methods of Polymer Characterization 1...

A novel photoactive polymer with two different molecular weights is reported, based on a new building block: thieno[3,2-b][1]benzothiophene isoindigo. Due to the improved crystallinity, optimal blend morphology, and higher charge mobility, solar-cell devices of the high-molecular-weight polymer exhibit a superior performance, affording efficiencies of 9.1% without the need for additives, anneal...

Effect of additives on the pore structure of polymer foams obtained from Pickering HIPE templates Various routes were investigated to create pore throats in closed-celled poly-Pickering-HIPEs; we tried to dissolve the silica particles used as emulsifiers out of the thin films separating individual pores by adding NaOH into the aqueous phase, which resulted indeed in the formation of interconnec...

A new photoactive polymer comprising benzo[1,2-b:3,4-b':5,6-d']trithiophene and 2,1,3-benzothiadiazole-5,6-dicarboxylic imide is reported. The synthetic design allows for alkyl chains to be introduced on both electron-rich and electron-deficient components, which in turn allows for rapid optimization of the alkyl chain substitution pattern. Consequently, the optimized polymer shows a maximum ef...