Poly (methyl methacrylate) (PMMA) was used as a matrix for fabrication samples of polymer composites (PMCs). The reinforcement by (Al2O3) powder with volumetric ratio (20%) and an average grain size (40 ±5) μm. manufactured were treated after conducting the surface treatment operations thermally different temperatures (50,70 90 ⁰C) times (2,4,6,8, 10 hours). subjected to set mechanical microsco...

The present study reports the preparation and evaluation of polymer composites of chitosan and montmorillonite. The prepared polymer composites were evaluated for various powder properties and characterized by FTIR-ATR (Fourier Transform Infrared Spectroscopy- Attenuated Total Reflectance), XRD (X Ray Diffraction), and SEM (Scaning Electron Microscopy) techniques. Heckel and Kawakita equations i...

Magnesium phosphate cement (MPC) has been proven to be a very good repair material for deteriorated concrete structures. It has excellent adhesion performance, leading to high bonding strength with old concrete substrates. This paper presents an experimental study into the properties of MPC binder as the matrix of carbon fiber sheets to form fiber-reinforced inorganic polymer (FRIP) composites....

HPMC Polymer composites were prepared by doping various concentrations of Zinc ferrite nanoparticles using solution casting method. These polymer composites were characterized using X-Ray Diffraction and conductivity measurements. The addition of nanoferrites in the polymer matrix do change the structural and the AC conductivity properties of the film, which is supported by the results obtained...

conducting polymers, because of their special properties, are used to introduce conductive polymeric composites. also, clays have recently been used for preparation of polymer composites with enhanced mechanical and thermal properties. the aim of this work is to study the synergetic effect of the co-presence of conducting polyaniline and montmorillonite in the polyethylene matrix. polyethylene ...

This review paper reported carbon nanotubes reinforced composites for biomedical applications. Several studies have found enhancement in the mechanical properties of CNTs-based reinforced composites by the addition of CNTs. CNTs reinforced composites have been intensively investigated for many aspects of life, especially being made for biomedical applications. The review introduced fabrication ...

The existing experimental evidence suggests that organic matrix composites sustain less impact damage when an electric field is applied. The intricate interaction of an electrical field and mechanical load is governed by coupling of the mechanical and electromagnetic fields via the Lorentz force as well as by the processes undergoing at the microscopic level: Joule heat, fiber-matrix interface ...

Effects of nutshell fiber loadings of 30 wt.% and MCC loadings up to 15 wt.% on some properties of high-density polyethylene composites (HDPE) were investigated. The composites were manufactured by a single screw extruder and injection molding. The experimental composite samples were tested for their mechanical performance including tensile strength, tensile modulus, flexural strength, flexural...

Using natural hemp fibers to reinforce the tensile characteristics of polymer matrix composites is investigated in this article. The fibers were applied to the epoxy matrix in unidirectional and hybrid tissue forms. After preparation of standard tensile stress test specimens via manual layup, the standard tensile test was done.  Young’s modulus, ultimate tensile stress, and the amount of absorb...