in this paper, the effect of polypropylene fibers added to concrete on strength and thermal resistance of high strength concrete has been investigated. therefore, five tests have been carried out to reach this goal which it includes; effect of weight percent of polypropylene fibers on mechanical properties of concrete, effect of fiber’s length on the strength of high strength concrete, effect o...

The mechanical properties of newly developed aspen fiber–polypropylene composites (APC) were experimentally explored and numerically predicted at the temperatures and humidity that are typical for domestic housing applications. The mechanical properties of APCs with five different fiber-loadings were evaluated at the room temperature, 4 �C, and 40 �C. Environmental effects on the mechanical pro...

influences of the wood fiber acetylation as well as the compatibilizer mapp on water absorption, thickness swelling and dimensional stability of acetylated wood/ polypropylene composites (wpcs) were the main concerns of this research. wood fibers were acetylated with acetic anhydride without using any catalyst to achieve weight percent gains (wpgs) of 4.5, 7.5 and 17.6%. the acetylated fibers w...

Melt spinning of polypropylene fibers containing silver and zinc nanoparticles was investigated. The nanometals were generally uniformly dispersed in polypropylene, but aggregation of these materials was observed on fiber surface and in fiber cross-sections. The mechanical properties of the resulted composite fibers with low concentration of nanometal were comparable to those for the control P...

The purpose of the paper is to determine the influence of two widely used steel fibers and polypropylene fibers on the sulphate crystallization resistance, freeze–thaw resistance and surface wettability of ultra-high performance concrete (UHPC). Tests were carried out on cubes and cylinders of plain UHPC and fiber reinforced UHPC with varying contents ranging from 0.25 to 1% steel fibers and/or...

This work presents an improved single fiber pull-out test for fiber/matrix interface characterization. This test has been used to study the Inter-Facial Shear Strength ‘IFSS’ of hemp fibers reinforced polypropylene (PP). For this aim, the fiber diameter has been carefully measured using a tomography inspired method. The fiber section contour can then be approximated by a circle or a polygon. Th...

In football, injuries from opponent contact occur commonly in the lower extremities. FIFA the world's governing body for football requires players to wear shin guards. The aim of this study was to compare the protective effectiveness of polypropylene based shin guards with custom-made carbon fiber ones. Three commercial polypropylene shin guards (Adidas Predator™, Adidas UCL™, and Nike Mercuria...

the influence of maleic anhydride-polypropylene (mapp) (0, 2, 3 and 5%) as a compatibilizer on the wettability of polypropylene/wood flour/glass fiber hybrid composites was studied by using the contact angle determination technique. sample slats with a cross section of 10×70 mm were made by a twin screw extruder. specimens were conditioned at room temperature and the angles between the water dr...

Nanocomposites of isotactic polypropylene (iPP) and date wood fiber were prepared after modification of the host matrix by reactive extrusion grafting of maleic anhydride. Chemical and mechanical treatment of date wood flour (WF) was conducted to obtain nanocrystalline cellulose. Layered silicates (clay) were partially intercalated with date wood fiber, and the modified layered silicate was use...

Cellulose fibers, cell wall fragments and cellulose microfibrils can be used as reinforced materials for biocomposite manufacture. Understanding nano-mechanical properties of those materials will be very useful to show their full theoretical potential. Nanoindentation testing is a technique that determines the mechanical properties of a material in the sub-micron/nano scale. The test involves p...