We demonstrate that a homogeneous porous medium composed of sedimentary particles develops channels due to curvature driven growth of fluid flow coupled with an increase in porosity. While the flux is increased linearly, the evolution of porosity is observed to be intermittent with erosion occurring at the boundaries between low and high porosity regions. Calculating the spatial distribution of...

The effect of porosity on the elastic behavior of cast steel is investigated experimentally, and an approach for including porosity effects in finite element analysis (FEA) simulations is presented. Porous cast steel specimens are mechanically tested having apparent elastic moduli reduced between 17 and 61 pct. Analysis of radiographs and tomography is used to measure and reconstruct the porosi...

Numerical simulation of tracer testing data is conducted based on hydrogeology parameters inferred from pressure interference data. By incorporating both of pressure interferences and tracer testing data, pertinent values of average fracture spacing and rock-matrix permeability can be estimated. Relatively good match of tracer return curves are obtained. It is necessary to assign very small fra...

Capillary porosity percolation in a hydrating cement paste has a large influence on transport properties and durability. Percolation can be examined using low-temperature calorimetry and using microstructure models. In this paper, the two approaches are compared for cement pastes with different water-to-cement ratios and exposed to various curing conditions. The influence of sealed curing is se...

In this study, fully-developed flow parallel to ordered fibrous structures is investigated analytically. The considered fibrous media are made up of in-line (square), staggered, and hexagonal arrays of cylinders. Starting from the general solution of Poisson’s equation, compact analytical solutions are proposed for both velocity distribution and permeability of the considered structures. In add...

A variety of materials require functionally graded cellular microstructures whose porosity is engineered to meet specific applications (e.g. mimic bone structure for orthopaedic applications; fulfil mechanical, thermal or acoustic constraints in structural foamed components, etc.). Although a huge variety of foams can be manufactured with homogenous porosity, there are no generic processes for ...

Characterization of the intragranular water regime within subsurface sediments: Pore volume, surface area, and mass transfer limitations" (2011). [1] Although ''intragranular'' pore space within grain aggregates, grain fractures, and mineral surface coatings may contain a relatively small fraction of the total porosity within a porous medium, it often contains a significant fraction of the reac...

We study the global distribution and morphology of dark matter voids in a ΛCDM universe using density fields generated by N-body simulations. Voids are defined as isolated regions of the low-density excursion set specified via density thresholds, the density thresholds being quantified by the corresponding filling factors, i.e., the fraction of the total volume in the excursion set. Our work en...

determination of porosity, permeability, and pore volume compressibility of reservoir rocks and those variations with effective stress changes are of great interest in petroleum engineering. this paper has studied the influence of pore types of carbonate reservoir rocks on pore volume compressibility as well as klinkenberg permeability and porosity at different stress values. in the current stu...

Wall-to-bed (or wall-to-fluid) heat transfer issues in trickle bed reactors (TBR) has an important impact on operation and efficiency in this category of reactors. In this study, the hydrodynamic and thermal behavior of trickle bed reactors was simulated by means of computational fluid dynamics (CFD) technique. The multiphase behavior of trickle bed reactor was studied by the implementation of ...