BACKGROUND AND PURPOSE Gold has often been used in medicine because of its radiopacity and flexibility. To perform stent-supported coil embolization of intracranial aneurysms, we prepared a gold stent and examined its flexibility, radiopacity, and thrombogenic properties in comparison with a stainless steel device implanted in vitro and in vivo. METHODS Gold stents were prepared by plating go...

In this paper, application of ultrasonic techniques for defect detection in weldments of austenitic stainless steel and maraging steel is discussed. Applications of ultrasonic techniques for characterizing microstructural changes in AISI type 316 stainless steel and modified 9Cr-1Mo ferritic steel; thermomechanical processing of 15Cr-15Ni-2.3Mo-titanium modified austenitic stainless steel (allo...

I . Cement-bone interface histology 60 II . Acrylic bone cement and the exotherm 61 III . Radiographic analysis of interfaces in total hip replacement 63 IV. Interface biomechanics in total hip replacement 63 V. Radiographic analysis of interfaces in total knee replacement 65 VI . Interface biomechanics in total knee replacement 65 VII . Biomaterials interface biomechanics 66 VIII . Ceramic/bon...

The applications of stainless steel are one of the most reliable solutions in concrete structures to reduce chloride-induced corrosion problems and increase the structures service life, however, due to high prices of nickel, especially in many civil engineering projects, the austenitic stainless steel is replaced by the ferritic stainless steels. Compared with austenite stainless steel, the fer...

The present work is focused on the investigation of the performance and long-term stability of two composite palladium membranes under different operating conditions. One membrane (Pd/porous stainless steel (PSS)) is characterized by a ~10 µm-thick palladium layer on a porous stainless steel substrate, which is pretreated by means of surface modification and oxidation; the other membrane (Pd/Al...

A palladium composite membrane was prepared by electroless plating on oxidized porous stainless steel support (ox-PSS). Hydrogen permeation flux through this composite membrane was measured in the temperature range of 574-674K and the pressure difference of two sides of membrane up to 90kPa. A simplified resistance model was employed to analyze the permeation behavior of hydrogen through Pd/ox-...

The purpose of the study was to measure and compare the level of frictional resistance generated between conventional ceramic brackets (Transcend Series 6000, 3M Unitek, Monrovia, Calif), ceramic brackets with stainless steel slot (Clarity, 3M Unitek), conventional stainless steel brackets (Victory Series, 3M Unitek), and 3 different orthodontic wire alloys: stainless steel (stainless steel, SD...

The initial material cost of structural stainless steel is about four times that of structural carbon steel, due largely to the expense of the alloying elements and the relatively low volume of production. Given broadly similar structural performance, additional areas of benefit need to be identified and exploited in order to establish stainless steel as a viable alternative material for constr...

This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...

PURPOSE To visualize flow dynamics of analytes inside porous metallic materials with laser-detected magnetic resonance imaging (MRI). MATERIALS AND METHODS We examine the flow of nuclear-polarized water in a porous stainless steel cylinder. Laser-detected MRI utilizes a sensitive optical atomic magnetometer as the detector. Imaging was performed in a remote-detection mode: the encoding was co...