Mechanical extraction: this traditional method of cottonseed oil extraction uses a circular mortar (called ghani in India, Achaya, 1993) or more advanced technology, such as a hydraulic press or a screw press (expeller). The cotton seeds may be dehulled, cracked, dried or heated before being fed to the press. The resulting cake is dried, ground and then processed into large pellets (Ash, 1992)....

A new format of fast three-phase microextraction by combining low-density solvent-based dispersive liquid-liquid microextraction (DLLME) and single-drop microextraction (SDME) was for the first time developed for the determination of chlorophenols in environmental water samples. The extraction procedure includes a 2 min DLLME pre-extraction and a 10 min SDME back-extraction. A portion of low-de...

In the paper, in order to pre-concentrate and measure the low values of Cu ions, the new, simple,quick and very sensitive method of Dispersed Liquid-Liquid Micro Extraction (DLLME) coupledwith flame Atomic Absorption spectrometry (AA) has been utilized. The DLLME techniquecoupled with AA )AA-DLLME) was run inside one narrow tube which constitute aqueous samples.In this m...

In the present work, optimization of pectinase-assisted and tri-solvent-mediated extraction of lycopene from waste tomato peels was carried out. The optimized parameters for enzymatic pre-treatment were 2% pectinase concentration, pH 5.5, 4-h incubation, 45 °C and 150 rpm. Maximum recovery of lycopene from tomato peels using optimized tri-solvent extraction was achieved at 45 °C, 120-min incuba...

*Correspondence: Peer M. Schenk, Algae Biotechnology Laboratory, School of Agriculture and Food Sciences, The University of Queensland, Level 5, John Hines Building, Brisbane, QLD 4072, Australia e-mail: [email protected] Microalgal lipid recovery for biodiesel production is currently considered suboptimal, but pre-treatment of algal biomass, the use of solvent mixtures and the positioning of ...

Background & Aims: In this study, using a liquid-liquid microextraction method for pre-concentration trace amounts of aflatoxins, the amount of Aflatoxins B1 and B2 in powdered milk was determined. Determination of aflatoxins was done by using high-performance liquid chromatography coupled with fluorescent detector. Method: Samples were extracted by immunoaffinity column (IAC) clean-up, and the...

In this work, optimization of supercritical methanol extraction and transesterification for the production of biodiesel was investigated using Jatropha curcas L. seeds. Several important process parameters including heat pre-treatment (45°C-105°C for 12 and 24 hours), particle size (0.5 mm-2.0 mm) and temperature (200°C-300°C) were being studied by varying one factor at a time. The experiment w...