in this paper, an experimental and numerical investigation into the effect of the hoop welding in metallic pressure vessel is presented. in the experimental manufacturing, hoop welding was used to attach the cylindrical body of the vessel, and the effect of welding into stress and strain distribution is carried out. experimental strains are obtained by using the strain gauges attached to predet...

Submerged Arc welding process is automated and semiautomated high deposition down hand welding process not vertical or over welding process, The fundamental difference of this welding process is that the Arc is not visible it is submerged into the flux. Weldment is fully submerged the heat loss is minimum and the thermal efficiency is very high up to 80-90%. A constant power sources and control...

There are many industries where austenitic stainless steel needs to be welded specially in power generation industries. Unfortunately the austenitic stainless welding has several fabrication and metallurgical drawbacks when welded by using conventional fusion welding methods, which can often leads to in-service failure. The most pronounced fabrication faults are hot cracks due to inadvertent us...

Friction welding is a solid state bonding technique which utilizes the heat generated by rubbing of two faying surfaces for the coalescence of material. Friction welding process is normally considered as a multi-input and multi-output process. Optimization of friction welding parameters is required to get good quality joints. Present study establishes the relationship between the input variable...

Welding involves a metallurgical union process that relies on base metal fusion, i.e. the constituent metal of the structure, with or without filler metal, to form the soldered joint. Thus, a definition of welding proposed by the AWS is an "operation which aims to get localized coalescence produced by heating to a suitable temperature, with or without applying pressure and filler metal, produci...

In this research, the effects of parameters include tool rotational and traverse speeds were investigated on heat generation and material flow during friction stir welding of Ti-6Al-4V alloy with computational fluid dynamics (CFD) method. Simulation results showed that with increasing of tool rotational and decreasing tool traverse speed, the more frictional heat generates which causes formatio...