AIM One of the most common problems with transpedicular screws is screw pullout. This study was conducted to measure the pullout strengths of newly designed transpedicular screws. MATERIAL AND METHODS The design of the three group screws were conical cored standard pedicle screw (Type A), dual threaded pedicle screw (Type B), dual core and dual threaded pedicle screw (Type C), respectively. P...

INTRODUCTION Biomechanical properties of four different commercially available small fragment cannulated screws (Twin fix (Stryker, Freiburg, Germany), Herbert, (Zimmer, Warsaw, USA), Omnitech (Unimedical, Torino, Italy), Barouk (Depuy, Warsaw, USA)), with variable pitch, used for fracture fixation were compared. MATERIALS AND METHODS Polyurethane foam blocks of three different densities with...

While the biomechanical properties of pedicle screws have proven to be superior in the lumbar spine, little is known concerning pullout strength of pedicle screws in comparison to hooks in the thoracic spine. In vitro biomechanical pullout testing was performed to evaluate the axial pullout strength of pedicle screws versus pedicle and laminar hooks in the thoracic spine with regard to surgical...

Pullout failure is one of the primary failure modes of API round thread casing connections. Make-up torque and thread tolerances are the two most important factors that can affect the pullout strength. In this paper, the pull-out failure process and mechanism are studied using the finite element analysis (FEA) method. In addition, the effects of make-up torque and thread tolerances on the pullo...

This paper presents the effect of geogrid tensile strength by calculating pullout resistance and geogrid-soil interaction mechanism. In order to investigate this interface, a series of pullout tests have been conducted by large scale reformed direct shear test apparatus in both cohesive and granular soils. In numerical, finite difference software FLAC3D has been carried out on experimental test...

Pectoralis major ruptures occur in large, muscular individuals, and repair constructs may experience significant tension. Four different suture techniques were evaluated biomechanically to determine the effect of suture technique on optimizing fixation strength. Forty fresh-frozen cadaveric shoulders were repaired using endosteal buttons. The control group was repaired with #2 polyblend suture ...

OBJECTIVE Pedicle screw fixation for spine arthrodesis is a useful procedure for the treatment of spinal disorders. However, instrument failure often occurs, and pedicle screw loosening is the initial step of a range of complications. The authors recently used a modified transpedicular polymethylmethacrylate (PMMA) screw augmentation technique to overcome pedicle screw loosening. Here, they rep...

Acupuncture needle manipulation gives rise to "needle grasp," a biomechanical phenomenon characterized by an increase in the force necessary to pull the needle out of the tissue (pullout force). This study investigates the hypothesis that winding of connective tissue, rather than muscle contraction, is the mechanism responsible for needle grasp. We performed 1) measurements of pullout force in ...

Short-segment instrumentation for spine fractures is threatened by relatively high failure rates. Failure of the spinal pedicle screws including breakage and loosening may jeopardize the fixation integrity and lead to treatment failure. Two important design objectives, bending strength and pullout strength, may conflict with each other and warrant a multiobjective optimization study. In the pre...

It is well known that fibers improve the performance of cementitious composites by acting as bridging ligaments in cracks. Such bridging behavior is often studied through fiber pullout tests. The relation between the pullout force vs. slip end displacement is characteristic of the fiber-matrix interface. However, such a relation varies significantly with the fiber inclination angle. In the curr...