The construction of the 60-MeV proton linac has started as a low-energy front of the KEK/JAERI Joint Project for a high-intensity proton accelerator facility at KEK. The accelerating frequency is 324 MHz. Five UHF klystrons are used as an rf source; their ratings have a maximum power of 3 MW, a beam pulse width of a 700 μsec (an rf pulse width is 650 μsec) and a repetition rate of 50 pps. We ha...

This paper presents a Class-D power amplifier for bandpass pulse width modulated (BP-PWM) and bandpass deltasigma modulated (BP-DSM) signals at 20 MHz. A 1-bit 6-th order topology is used in the ∆Σ-modulator. Integral noise shaping is used in the generation of the bandpass pulse width modulated signal. A two sided pulse width modulation is used with a 6-bit 4th-order noise shaper. The push-pull...

in this paper, a ground early warning receiver is introduced and explained for the reception and monitoring of signal from a space-borne synthetic aperture radar. this receiver can be used for various electronic warfare applications and implemented in two sectors of time parameter detector and frequency parameter detector. it can measure power, bandwidth, central frequency, pulse width, pulse r...

We report an improved approach to generate optical triangular-shaped pulse train using quadrupling RF modulation and fiber dispersion-induced power fading. In the proposal, quadrupling RF modulation (via a dual-parallel Mach–Zehnder modulator) is employed to generate four primary optical sidebands (±2nd and ±6th) in spectrum. Then a piece of single mode fiber is connected as the dispersive medi...

Unfortunately, traditional RF pulse measurements become less effective predictors of performance in radars that use pulse compression. For example, the width of an uncompressed radar pulse is directly related to spatial resolution. In contrast, the resolution depends on pulse width, chirp bandwidth and chirp linearity in a compressed radar system that uses linear frequency modulated (LFM) chirp...

This paper demonstrates a pulse width controlled PLL without using an LPF. A pulse width controlled oscillator accepts the PFD output where its pulse width controls the oscillation frequency. In the pulse width controlled oscillator, the input pulse width is converted into soft thermometer code through a time to soft thermometer code converter and the code controls the ring oscillator frequency...