Accession of the Republic of Poland to the European Union (EU) has committed Poland to adopt, among others, policy of opening up the market of products and services in the area of rail transport. Follow decision about the opening of the EU market and transport services for rail transport, the European Parliament and of the Council have introduced a number of safety and interoperability directiv...

Magnetic levitation is a popular topic of research over the years throughout the world due to its wide range of industrial applications. In any DC attraction type suspension system, actuator and guide-way (rail) plays most important role. In this manuscript FEM based analysis of different structures of actuator and rail (guide-way) has been carried out utilizing ANSYS software. Input power to l...

Running rails used as a return conductor and ungrounded scheme have been widely adopted in DC traction power systems. Due to the longitudinal resistance of running rails and insulation resistance of rail-to-ground, there will be a potential rise between running rails and the ground when return current flows through the running rails, which is known as rail potential. At present, abnormal rise o...

This report evaluates rail transit benefits based on a comprehensive analysis of urban transportation system performance in major U.S. cities. It discusses best practices for evaluating transit benefits. It finds that cities with larger, well-established rail systems have significantly higher per capita transit ridership, lower average per capita vehicle ownership and mileage, less traffic cong...

The rail fastening system is an important part of a high-speed railway track. It is always critical to the operational safety and comfort of railway vehicles. Therefore, the condition detection of the rail fastening system, looseness or absence, is an important task in railway maintenance. However, the vision-based method cannot identify the severity of rail fastener looseness. In this paper, t...

Ultrasonic techniques have been used for many years for the inspection of rail. These measurements can detect the presence of a wide variety of defects but there are practical difficulties with the technology. While large transverse cracks of the type likely to cause catastrophic failure can be detected, the large, critical defects can be masked by large numbers of small, surface defects along ...

Currently most modern dc rapid transit systems around the world use running rails or a negative rail as the negative return circuit for the dc traction current. These rails are intentionally kept ungrounded from ground (earth) by using insulating material between the rail and earth to minimize dc stray current. This configuration of return current rail develops varying voltage with respect to g...

A vehicle body, two bogie frames and two wheelsets for each bogie frame are used to describe the railway vehicle model. The system dynamic is modeled using a 38-DOF system including the longitudinal, lateral, vertical, roll, pitch and yaw displacements. A heuristic nonlinear creep model and the elastic rail are used to simulate the wheel-rail contact. Stable movement and the corresponding limit...

With dynamic behaviour different from that of traditional discretely supported tracks, continuously embedded rail systems (ERSs) have been increasingly used in railway bridges, level crossings, trams, and high-speed lines. However, studies on ERSs limited, none them addressed the wheel-rail impact-induced response, although impact is a main cause ERS degradation. This paper studies, numerically...

1. Classification of Transit Systems 2. Bus Transit System 3. Trolleybus System 4. Rail Transit Systems 5. Tramway/Streetcar and Light Rail Transit LRT 6. Rapid Transit or Metro 7. Automated Guided Transit Systems 8. Regional and Commuter Rail 9. Special Technology Transit Systems 10. Transit Line Scheduling 11. Transit Planning and Selection of Transit Modes 12. Present and Future Role of Urba...