The progressive collapse of the building structures due to accidents has become a hot research topic of civil engineering all around the world. The researches and designs on progressive collapse are based on accurately simulation for the failure process of whole structural systems. However, due to the complicated material and geometric nonlinearity and large computational workload in collapse s...

A new layered 4-node, 24-degrees of freedom rectangular composite plate element is developed in this paper for nonlinear finite element analyses of FRP-strengthened RC slabs. The layered approach is used to form an integrated plate element for modelling of concrete, FRP, adhesive layer and steel reinforcement with a perfect bond assumption between each layer. Timoshenko’s composite beam functio...

This paper describes the results of experimental testing of glass fiber reinforced plastic (GFRP) composite beam strengthened reinforced concrete (RC) slabs with two symmetrical openings. Specimens, one-half scale, have been designed and fabricated to reflect the most common RC bathroom slab used in school buildings. The specimen had dimensions of 2000 mm (width) × 150 mm (thickness) × 3000 mm ...

The scope of this study is to look at the effect supplying a non-prismatic cross-section on flexural strength one-way continuous slabs reinforced concrete (RC) with two spans under repeated load. research aims ability increase stiffness which leads saving construction costs. For purpose, experimental investigations were carried out; work consisted fabrication and testing six two-span RC same vo...

Textile reinforced mortar (TRM) is mainly used for strengthening of existing structural members whereas, on the other hand concrete (TRC) a technology implied in construction new enhancing behaviour. Application TRM tension zone (RC) slabs to improve flexural capacity has been investigated by many researchers past. However, effectiveness textile fabrics, as internal reinforcement RC slab (TRC t...

The recent re-assessment of the seismic hazard in Europe led for many regions of low to moderate seismicity to an increase in the seismic demand. As a consequence, several modern unreinforced masonry (URM) buildings, constructed with reinforced concrete (RC) slabs that provide an efficient rigid diaphragm action, no longer satisfy the seismic design check and have been retrofitted by adding or ...

The aim of this paper is to perform experimental modal analysis (EMA) of reinforced concrete (RC) square slabs. EMA is the process of determining the modal parameters (Natural Frequencies, damping factors, modal vectors) of a structure from a set of frequency response functions FRFs (curve fitting). Although, experimental modal analysis (or modal testing) has grown steadily in popularity since ...